Linksys Complete Guide to Configuring the Wireless-G VPN Router with QuickVPN Features
Page 15

Chapter 5

Configuring the Wireless-G Router

assigns an IP address to each PC on your network. Unless you already have one, it is highly recommended that you leave the Router enabled as a DHCP server.

Local DHCP Server  DHCP is already enabled by factory default. If you already have a DHCP server on your network, set the Router’s DHCP option to Disabled. If you disable DHCP, assign a static IP address to the Router.

Start IP Address  Enter a value for the DHCP server to start with when issuing IP addresses. This value must be 192.168.1. 2 or greater, but smaller than 192.168.1.254, because the default IP address for the Router is 192.168.1.1, and 192.168.1.255 is the broadcast IP address.

Number of Address  Enter the maximum number of PCs that you want the DHCP server to assign IP addresses to. This number cannot be greater than 253. In order to determine the DHCP IP Address range, add the starting IP address (e.g., 100) to the number of DHCP users.

IP Address Range  The range of DHCP addresses is displayed here.

Client Lease Time  This is the amount of time a DHCP client can keep the assigned IP address before it sends a renewal request to the DHCP server.

The Static IP Table shows the mapping of MAC addresses to IP addresses. To use this feature, click Static IP Table, then enter the Static IP Address and MAC address in the fields, then click Add. To edit an entry, highlight the entry in the table, click Edit, make your changes in the fields, then click Add. To remove an entry, highlight the entry, then click Remove.

Manual DNS Setting  To enter the DNS IP addresses manually, check the box, then enter up to two IP addresses in the fields provided.

Static IP Table

Time Settings

This is where you set the time for the Router. You can set the time and date manually or automatically.

Manually  Select the date from the Date drop-down menus. Then enter the time in the Time fields.

Automatically  Select your time zone from the Time Zone drop-down menu. If you want to enable the Auto Daylight Savings feature, click Enabled.

When you have finished making changes to the screen, click Save Settings to save the changes, or click Cancel Changes to undo your changes.

Setup > VLAN

The Setup > VLAN screen allows you to use the Router’s port-based VLAN feature.

Setup > VLAN

Port-based VLAN  Select Enabled to enable the feature. When enabled, and a VLAN is selected, VLAN1 will be enabled as a default VLAN, so you will have two VLANs. Select Disabled to disable the feature. When this feature is disabled, all LAN ports are on the same LAN.

Number of VLAN  Select the number of the VLAN from the drop-down menu.

VLAN No.  Select the VLAN number to associate with the desired port.

When you have finished making changes to the screen, click Save Settings to save the changes, or click Cancel Changes to undo your changes.

Setup > DDNS

The Router offers a Dynamic Domain Name System (DDNS) feature. DDNS lets you assign a fixed host and domain name to a dynamic Internet IP address. It is useful when you are hosting your own website, FTP server, or other server behind the Router and your ISP does not give you a fixed IP address.

Before you can use this feature, you need to sign up for DDNS service at one of two DDNS service providers, DynDNS.org or TZO.com.

Wireless-G VPN Router with RangeBooster

10

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Wireless-G VPN Router with RangeBooster About This Guide About This GuideTable of Contents Appendix B Wireless Security Checklist Appendix a TroubleshootingAppendix E Gateway-to-Gateway VPN Tunnel Appendix I Regulatory InformationAppendix J Contact Information Introduction ChapterNetwork Layout Chapter Planning Your Wireless NetworkAd-Hoc versus Infrastructure Mode Network TopologyWhy do I need a VPN? What is a VPN?Chapter Planning Your Virtual Private Network VPN VPN Router to VPN Router Computer using the Linksys VPN client software to VPN RouterBack Panel Chapter Product OverviewProduct Overview Front PanelOverview Chapter Configuring the Wireless-G VPN Router Internet Setup How to Access the Web-based Utility Setup Setup Basic SettingsPptp LAN Setup Optional Settings Required by some ISPsSetup Vlan Setup DdnsTime Settings Ddns Setup MAC Address CloneSetup Advanced Routing Dynamic RoutingStatic Routing Wireless Network Mode WirelessWireless Basic Wireless Settings Wireless Wireless SecurityWPA2 Personal WPA EnterpriseWPA2 Enterprise WPA2 Enterprise Mixed WPA2 Personal MixedWireless Network Access Wireless Wireless Network AccessWireless Advanced Wireless Settings Wireless WDSAdvanced Wireless Settings Internet Block FirewallFirewall General Firewall Port ForwardingFirewall DMZ Firewall Port TriggeringFirewall Access Restriction VPN VPN Client AccessFirewall URL Filtering VPN VPN Passthrough VPN Client List TableCertificate Management VPN IPSec VPN Local Secure GroupRemote Secure Group Remote Secure Gateway Key ManagementTunnel Options VPN VPN Summary Priority Queue QoSQoS Application-Based QoS QoS Port-Based QoSLocal Router Access AdministrationAdministration Management Admin PasswordAdministration Log Backup and RestoreUPnP Ping Test Administration DiagnosticsAdministration Factory Default Administration Firmware UpgradeInformation Administration RebootStatus Status RouterLocal Network Status WirelessStatus Local Network Status System PerformanceStatus VPN Clients System PerformanceVPN Summary Windows Appendix a TroubleshootingTroubleshooting Appendix aTroubleshooting Need to set up a server behind my Router Go to the Firewall DMZ tab Click Save SettingsClick the Firewall Port Triggering tab Go to the Setup Basic Setup tabWRV200 does not support NetBIOS Broadcast over Frequently Asked QuestionsIs the Router cross-platform compatible? General Network Security Guidelines Appendix B Wireless Security ChecklistWireless Security Checklist Appendix BOverview Before You Begin Installing from the CD-ROMAppendix C Appendix CVersion Number of the QuickVPN Client Using the Linksys QuickVPN SoftwareSelect VPN, then VPN Client Access Distributing Certificates to QuickVPN Users\Program Files\Linksys\QuickVPN Client\ Create an IPSec Policy Appendix DIntroduction EnvironmentFilter List 2 router win Tunnel 1 win-Router Configure Individual Tunnel RulesTunnel 2 Router-win Rules Tab Assign New IPSec Policy Create a Tunnel Through the Web-Based UtilityYour tunnel should now be established Click IPSec VPN Configuration of the WRV200Appendix E Appendix E Gateway-to-Gateway VPN TunnelConfiguration of the RV082 Configuration of PC 1 and PCClick the Gateway to Gateway tab RV082 WRV200 Dynamic IP B.B.B.B with Configuration when Both Gateways Use Dynamic IP Addresses RV082 VPN Settings Http HyperText Transport Protocol Appendix FAppendix F Glossary GlossarySmtp Simple Mail Transfer Protocol The standard e GlossaryAppendix F Appendix G Specifications SpecificationsAppendix G Specifications Exclusions and Limitations Warranty InformationObtaining Warranty Service Appendix HTechnical Support Warranty InformationRegulatory Information AppendixAvis d’Industrie Canada Wireless DisclaimerDansk Danish Miljøinformation for kunder i EU Appendix Norsk Norwegian Miljøinformasjon for kunder i EU Appendix Contact Information Appendix J
Related manuals
Manual 2 pages 11.27 Kb
Top Page Image Contents