Linksys Etherfast manual IP Connectivity Test Ping, Http Configuration

Page 13

EtherFast® Series

IP Connectivity Test (Ping)

The IP Connectivity Test is used to see if another site or node on the net- work can be reached.

•IP Address - IP address of the device you want to ping.

•Test Times - The number of ICMP echo requests to send to the specified site. Range varies from 1 to 1000.

•Success/Failure - The number of times the specified site has responded— or not—to a ping request.

Note: There is a 10-second interval between pings.

Select Start to begin the test. Select Cancel to cancel the test.

EtherFast® Managed 24-Port with Dual Gigabit Switch

HTTP Configuration

The HTTP Configuration screen allows you to enable or disable Web man- agement.

Note: Port 80 is used for HTTP service.

Select Apply to make changes. Select OK to return to the previous panel. Select Cancel to cancel any changes.

20

21

Image 13

Contents EtherFast Managed 24-Port With Dual Gigabit Switch Copyright & Trademarks Introduction Table of ContentsPackage Contents Getting to Know the SwitchLEDs Gigabit Ports RJ-45 PortsConsole Port Pre-Installation Considerations Installing the SwitchRack-Mounting the Switch Powering on the SwitchOverview Switch ManagementWeb Management Logging On to the Switch Configuring the SwitchMain Menu System Information System Information MenuManagement Setup Menu Switch InformationIP Configuration Network ConfigurationIP Connectivity Test Ping Http ConfigurationSnmp Configuration Serial Port ConfigurationIP Trap Managers Snmp CommunitiesAdd User User ConfigurationTftp Download Configuration FileDevice Control Menu Layer 2 Menu System ModeMirror Port Configuration Port ConfigurationStatic Unicast Address Configuration Port Trunking ConfigurationAdd Static Address Entry Static Multicast Address ConfigurationBridge Menu Add Multicast Address EntrySpanning Tree Port Configuration Bridge ConfigurationVlan Menu Vlan Port ConfigurationVlan and Priority Vlan Table ConfigurationIP Menu Subnet ConfigurationAdd Subnet Protocol ConfigurationRIP Configuration ARP ConfigurationAdd Bootp Relay Server Bootp Relay Database ConfigurationStatic ARP Table Static Route Table Add Static ARP EntryAdd Routing Entry Default Route MenuSecurity Menu MAC Filtering ConfigurationIP Security Filtering Configuration Security ModeAdd MAC Address Filter Add IP Address FilterNetwork Monitor Menu Igmp Snooping ConfigurationPort Statistics Port Statistics/Statistics MenuInterfaces Group Ethernet-Like Rmon Statistics Layer 2 Address Table Spanning Tree Port Information Spanning Tree Bridge InformationVlan Information Vlan Forwarding Information Vlan Dynamic Registration InformationIP Multicast Registration Table ARP Table Subnet InformationMulticast Table Menu Routing TableIgmp Cache Dvmrp Routing Table Multicast Forwarding CacheSystem Restart Menu Dvmrp Neighbor TableCommon Problems and Solutions TroubleshootingExit Tion Appendix Your firmware has now been updatedUpgrading Firmware via the Serial Port Glossary 101 103 Warranty Information SpecificationsEnvironmental Contact Information Tech Support RMA Issues FaxSales Information Web FTP SiteT p / / w w w. l i n k s y s . c o m