Linksys Etherfast manual Add Multicast Address Entry, Bridge Menu

Page 23

EtherFast® Series

Add Multicast Address Entry

The Add Static Address Entry screen allows you to add static addresses for multicasting.

•VLAN - The VLAN corresponding to this multicast service.

•Address - The destination MAC address for a multicast service.

•Port - The ports to which this multicast traffic can be forwarded.

Read the numbers vertically; they range from 1-26. For each port number, there are two choices: “M” or nothing. Use the spacebar to scroll through the choices.

Select the letter “M” to indicate that the VLAN has access to mes- sages transmitted by that particular port.

Select a blank space to indicate that there is no access to messages transmitted by that particular port.

Select OK to confirm the changes. Select Cancel to cancel any changes.

EtherFast® Managed 24-Port with Dual Gigabit Switch

Bridge Menu

The Bridge Menu is used to configure settings for the Spanning Tree Algorithm, as well as the global bridge settings for GMRP (GARP Multicast Registration Protocol) and GVRP (GARP VLAN Registration Protocol), traf- fic classes priority threshold, and address aging time.

•Bridge Configuration - Contains global bridge settings for STA (includ- ing bridge priority, hello time, forward delay, maximum message age), GMRP, GVRP, traffic class priority threshold, and address aging time.

•Spanning Tree Port Configuration - Contains STA settings for individual ports, including port priority, path cost, and fast forwarding.

Select OK to return to the previous panel.

40

41

Image 23

Contents EtherFast Managed 24-Port With Dual Gigabit Switch Copyright & Trademarks Introduction Table of ContentsLEDs Getting to Know the SwitchPackage Contents Console Port RJ-45 PortsGigabit Ports Powering on the Switch Installing the SwitchPre-Installation Considerations Rack-Mounting the SwitchOverview Switch ManagementWeb Management Main Menu Configuring the SwitchLogging On to the Switch System Information System Information MenuManagement Setup Menu Switch InformationIP Configuration Network ConfigurationIP Connectivity Test Ping Http ConfigurationSnmp Configuration Serial Port ConfigurationIP Trap Managers Snmp CommunitiesAdd User User ConfigurationTftp Download Configuration FileDevice Control Menu Layer 2 Menu System ModeMirror Port Configuration Port ConfigurationStatic Unicast Address Configuration Port Trunking ConfigurationAdd Static Address Entry Static Multicast Address ConfigurationBridge Menu Add Multicast Address EntrySpanning Tree Port Configuration Bridge ConfigurationVlan Menu Vlan Port ConfigurationVlan and Priority Vlan Table ConfigurationIP Menu Subnet ConfigurationAdd Subnet Protocol ConfigurationRIP Configuration ARP ConfigurationStatic ARP Table Bootp Relay Database ConfigurationAdd Bootp Relay Server Static Route Table Add Static ARP EntryAdd Routing Entry Default Route MenuSecurity Menu MAC Filtering ConfigurationAdd IP Address Filter Security ModeIP Security Filtering Configuration Add MAC Address FilterNetwork Monitor Menu Igmp Snooping ConfigurationInterfaces Group Port Statistics/Statistics MenuPort Statistics Ethernet-Like Rmon Statistics Layer 2 Address Table Spanning Tree Port Information Spanning Tree Bridge InformationVlan Information Vlan Forwarding Information Vlan Dynamic Registration InformationIP Multicast Registration Table ARP Table Subnet InformationMulticast Table Menu Routing TableIgmp Cache Dvmrp Routing Table Multicast Forwarding CacheSystem Restart Menu Dvmrp Neighbor TableExit TroubleshootingCommon Problems and Solutions Tion Upgrading Firmware via the Serial Port Your firmware has now been updatedAppendix Glossary 101 103 Environmental SpecificationsWarranty Information Web FTP Site Tech Support RMA Issues FaxContact Information Sales InformationT p / / w w w. l i n k s y s . c o m