EtherFast® Series
Routing Table
The Routing Table lists the routes through which all recognized Ethernet networks (and corresponding VLAN) can be reached.
•Destination Network - A destination network, subnet, or host.
•Destination Mask - The subnet mask that specifies the bits to match.
•VLAN - The VLAN within which the gateway or destination address resides.
•Next Hop - The IP address of the router at the next hop.
•Type - The IP route type for the destination network.
Direct: A directly connected subnetwork
Indirect: A remote IP subnetwork or host address
Myself: A switch IP address on a specific IP subnetwork
Bcast: A subnetwork broadcast address
Mcast: An IP multicast address
Invalid: An illegal IP address to be filtered
EtherFast® Managed
• Protocol - How the route was learned.
Local: Manually configured
Mgmt: Set via SNMP
ICMP: Obtained via ICMP redirect
RIP: Learned via RIP protocol
Other: Learned by some other method
Select Apply to make changes. Select OK to return to the previous panel. Select Prev Page to view the previous page. Select Next Page to view the next page. To display a specific page, set the page number in the Page field and then press Apply. Select Flush RIP to flush the RIP protocol.
Multicast Table Menu
The Multicast Table Menu offers a variety of multicasting settings.
•Multicast Registration Table - Displays all the multicast groups active on the Switch, including the multicast IP address and the corresponding VLANs. (See page 80.)
•IGMP Cache - Cache for IGMP.
84 | 85 |