Linksys BEFW11S4 ver. 3 manual Configure the Router, Unique name For, Your, 101

Page 51

Instant Wireless™ Series

Step 3: Configure the Router

In Step 3, you will configure the Router to function in your network and gain access to the Internet through your Internet Service Provider (ISP). Further, you will set the WAN Configuration Type on the Router’s Setup tab from the information given by your ISP. You will need this setup information from your ISP. If you do not have this information, please contact your ISP before proceeding. To find out what questions you should ask your ISP, refer to question #1 in the Help section.

The instructions from your ISP tell you how to set up your PC for Internet access. Since you are now using the Router to share Internet access among several computers, you will use this setup information for Router configuration.

A.Open your web browser. (It’s all right if you get an error message at this point. Continue following these instructions) Enter 192.168.1.1 into the web browser’s Address field and press the Enter key.

A

B. An Enter Network Password window, shown in Figure B1, will appear. (Windows XP users will see a Connect to 192.168.1.1 window, shown in Figure B2.) Leave the User Name field empty, and enter admin (the default password) in lowercase letters in the Password field. Then, click the OK button.

B1

B2

Wireless Access Point Router with 4-Port Switch

C.To configure the Router for your wireless network, verify that the Setup tab’s Wireless fields (shown in Figure D) are completed as follows:

Enable/Disable: Selecting the Enable radio button will enable the Router’s wireless feature. Wireless functions will not be available unless enabled.

SSID: The SSID (or ESSID) is

 

a unique name

for

your

 

wireless network.

It is case

D

sensitive and

must

not

 

 

exceed 32 characters. The default SSID is "linksys " but you should change this to a personal wireless network name. All wireless points in your network must use the same SSID.

Channel: Select the appropriate channel for your network from the list provided. All wireless points in your network must use the same channel in order to function properly.

Note: If you are interested in changing the Router’s WEP settings, turn to the section for Configuring Wireless Security.

D.The Router supports five connection types: DHCP (obtain an IP automatically), PPPoE, Static IP Address, RAS, and PPTP. These types are selected from the pull-down menu beside WAN Connection Type. If you possess a standard ADSL, subscription, choose PPPoE.

100

101

Page 50 Page 52
Image 51
Page 50 Page 52
Contents Instant Wireless Series Wireless Access Point Router with 4-Port SwitchTable of Contents Table des matières Possibilités offertes IntroductionConnecter au routeur Passez à l’étape 2 configuration des PC page suivanteÉtape 1 connexion du routeur Local du routeur. RecommencezVous le demande pas, redémarrez quand même l’ordinateur Étape 2 configuration des PCAu réseau local répertoriée. Double-cliquez WindowsÉtape 3 configuration du routeur Routeur de point d’accès sans fil avec commutateur 4 ports Activer le WEP AideSécuriser votre réseau sans fil Modifier le SsidSi vous avez ce type Procédez comme suit De connexion Instant Wireless Series Figure C-1 Configuration de la sécurité sans filConfiguration de la sécurité sans fil dans Windows XP Figure C-4 Figure C-8 Inhoud 10/100 Workgroup Hubs InleidingStap 1 Sluit de router aan Stap 1 Sluit de router aanElke pc die u wenst aan te sluiten Stap 2 Configureer de pc’sLocal Area Connection Stap 3 Configureer de router HetPictogram voor de betreffende Ethernet PPPoE VervolledigVelden Het De naam van uw draadloosActiveer WEP-encryptie RaadpleegtBeveiliging van uw draadloos netwerk Verander de SsidHelp Configuratie van Windows-instellingen De WAN Link LED licht niet op. Wat moet ik controleren?Klik op de Connections-tab in het Internet Options-venster Configuratie van de draadloze beveiliging Figuur C-2 Figuur C-1Figuur C-3 Figuur C-4Figuur C-5 Figuur C-8 Figuur C-6Figuur C-7 Figuur C-9Figuur C-10 Inhaltsverzeichnis Schritt 3 Konfigurieren des Routers EinführungSchritt 1 Anschließen des Routers Schritt 2 Konfigurieren der PCsPC, den Sie an den Router Schritt 1 Anschließen des RoutersAn, z. B. D\win98 Schritt 2 Konfigurieren der PCsNetzwerk zu öffnen Windows oder nach zusätzlichen DateienDeaktivieren? Starten Sie Ihren Computer neuSchritt 3 Konfigurieren des Routers DieSsid lautet linksys. Sie sollten Linksys unter support.linksys.com PPPoE Führ diese Schritte ausIhren Benutzernamen Ihr Kennwort HilfeVerbindungstyp Führen Sie diese Schritte aus Wie kann ich die Betriebsreichweite des Routers verbessern? Konfigurieren der Wireless-Sicherheit Abbildung C-2Abbildung C-1 Abbildung C-3 Konfigurieren der Wireless-Sicherheit unter Windows XPAbbildung C-7 Abbildung C-4Abbildung C-6 Abbildung C-5Abbildung C-8 Abbildung C-9Abbildung C-10 Copyright & Trademarks But what does all of this mean? Wireless Access Point Router with 4-Port SwitchLAN ports. Repeat this process Proceed to Configure the PCs on the nextConnect the Router Connect an Ethernet cable toIf Windows asks you to restart your PC Configure the PCsCheck Never Dial Up a Connection. E. Click the Apply button 101 Configure the RouterUnique name For Your103 105 Change / activate passwordsActivate WEP Activate MAC-address control listService in Europe, check with your ISP for Click the Apply button to save the settingClick the Apply button to save the settings Enter the Password109 111 Configuring Wireless Security113 Configuring Wireless Security in Windows XP115 117 Ssid119 Copyright 2003 Linksys, All Rights Reserved
Top Page Image Contents