Instant Wireless™ Series
Step 1: Connect the Router
In Step 1, you will connect the Router to your ADSL modem and to your home or business computers.
First, make sure that all devices you’ll be working with are powered down, including your PCs, modem, and the Router.
A.If you haven’t already done so, connect your ADSL modem to the phone jack. (Follow the instructions from your ADSL modem’s installation guide.)
B.Using an Ethernet cable, connect the LAN or Ethernet port of the ADSL modem to the Router’s WAN port.
B
Wireless Access Point Router with 4-Port Switch
C. Connect an Ethernet cable to |
|
your PC’s Ethernet adapter. |
|
Connect the other end of the |
|
cable to one of the Router’s |
|
LAN ports. Repeat this process |
|
for every PC you wish to con- | C1 |
nect to the Router. |
|
Note: If your PC’s Ethernet adapter is not set up, please refer to the Ethernet adapter’s documentation for more information.
For ease of installation, start with LAN Port 1 on the Router, then Port 2, Port 3, and finally Port 4.
C2
D.Connect the power adapter to the Router’s Power port. Then, connect the power adapter to an electrical outlet. Turn on the ADSL modem. Then turn on the first PC you wish to use when configuring the Router.
Proceed to Step 2: Configure the PCs on the next page.
94 | 95 |