Linksys BEFW11S4 ver. 3 manual 109

Page 55

Instant Wireless™ Series

•The IP Address field should show an IP address of 192.168.1.100 or 192.168.1.xxx, with “xxx” being any number greater than 100.

If your IP address is not in that range, hold the reset button on the front of the Router for more than 30 seconds. This will cause your Router to be set to factory default, so you will need to re-configure the Router's Setup page. After re-configuring the Setup page, restart the computer.

C.Now you will configure some settings in Windows.

-Go to your desktop and double-click My Computer, and then double-click Control Panel (Windows XP users using the default interface, click Start, and then select Control Panel).

-When the Control Panel window pops up, double-click the Internet Options icon (Windows XP users using the default interface, click Network and Internet Connections, and then click Internet Options).

-When the Internet Options window appears, click the Connections tab.

-Check Never Dial Up a Connection. (If this choice is grayed out, that is fine.)

-Click the LAN Settings … button in the lower right-hand corner.

-When the Local Area Network (LAN) Settings window appears, uncheck all boxes.

-Click the OK button and the Apply button (the Apply button will be grayed out if you did not have to make any changes). Then click the OK button again.

-Exit the Control Panel, and restart your computer.

4.When I click on the icon to access the Internet, and enter the user name and password that my ISP gave me, I cannot connect to the Internet. What is wrong?

This means that you’re using the software given to you by your ISP. Please use Internet Explorer or Netscape Navigator, which is located on your desktop (located on the Start Menu in Windows XP).

5.When I use Internet Explorer, a box pops up prompting me to dial up a connection. How can I disable that?

A.Go to your desktop and double-click My Computer, and then double-click Control Panel (Windows XP users using the default interface, click Start, and then select Control Panel).

B.When the Control Panel window pops up, double-click the Internet Options icon (Windows XP users using the default interface, click Network and Internet Connections, and then click Internet Options).

C.When the Internet Options window appears, click the Connections tab.

Wireless Access Point Router with 4-Port Switch

D.Check Never Dial Up a Connection.

E.Click the Apply button.

F.Click the OK button.

6.I get no signal strength or link quality or signal strength, what can I do?

A.Verify that the Router’s WLAN LED is illuminated.

B.Verify that all of your wireless PCs are using “Infrastructure” mode.

7. How can I improve the Router’s range?

A.Verify that the Router is as high off of the ground as possible.

B.Verify that there are no large sources of electrical interference nearby. (For example: speakers breaker boxes, florescent lights, microwaves, etc.)

C.Change the wireless channel being used. To do this:

-Open your web browser and type http://192.168.1.1 into the "Address" field.

-In the "Enter Network Password" box, leave the "User Name" field blank and type admin as the password. Then, click OK.

-From the Setup tab, change the channel to 1.

-Click the Apply button to save the settings.

-Continue doing this until you find the channel that provides the best range.

108

109

Page 54 Page 56
Image 55
Page 54 Page 56
Contents
Instant Wireless Series Wireless Access Point Router with 4-Port SwitchTable of Contents Table des matières Possibilités offertes IntroductionConnecter au routeur Passez à l’étape 2 configuration des PC page suivanteÉtape 1 connexion du routeur Local du routeur. RecommencezVous le demande pas, redémarrez quand même l’ordinateur Étape 2 configuration des PCAu réseau local répertoriée. Double-cliquez WindowsÉtape 3 configuration du routeur Routeur de point d’accès sans fil avec commutateur 4 ports Activer le WEP AideSécuriser votre réseau sans fil Modifier le SsidSi vous avez ce type Procédez comme suit De connexion Instant Wireless Series Figure C-1 Configuration de la sécurité sans filConfiguration de la sécurité sans fil dans Windows XP Figure C-4 Figure C-8 Inhoud 10/100 Workgroup Hubs InleidingStap 1 Sluit de router aan Stap 1 Sluit de router aanElke pc die u wenst aan te sluiten Stap 2 Configureer de pc’sLocal Area Connection Het Stap 3 Configureer de routerPictogram voor de betreffende Ethernet PPPoE VervolledigVelden Het De naam van uw draadloosActiveer WEP-encryptie RaadpleegtBeveiliging van uw draadloos netwerk Verander de SsidHelp De WAN Link LED licht niet op. Wat moet ik controleren? Configuratie van Windows-instellingenKlik op de Connections-tab in het Internet Options-venster Configuratie van de draadloze beveiliging Figuur C-2 Figuur C-1Figuur C-4 Figuur C-3Figuur C-5 Figuur C-8 Figuur C-6Figuur C-7 Figuur C-9Figuur C-10 Inhaltsverzeichnis Schritt 3 Konfigurieren des Routers EinführungSchritt 1 Anschließen des Routers Schritt 2 Konfigurieren der PCsPC, den Sie an den Router Schritt 1 Anschließen des RoutersAn, z. B. D\win98 Schritt 2 Konfigurieren der PCsNetzwerk zu öffnen Windows oder nach zusätzlichen DateienDeaktivieren? Starten Sie Ihren Computer neuDie Schritt 3 Konfigurieren des RoutersSsid lautet linksys. Sie sollten Linksys unter support.linksys.com PPPoE Führ diese Schritte ausIhren Benutzernamen Ihr Kennwort HilfeVerbindungstyp Führen Sie diese Schritte aus Wie kann ich die Betriebsreichweite des Routers verbessern? Abbildung C-2 Konfigurieren der Wireless-SicherheitAbbildung C-1 Abbildung C-3 Konfigurieren der Wireless-Sicherheit unter Windows XPAbbildung C-7 Abbildung C-4Abbildung C-6 Abbildung C-5Abbildung C-9 Abbildung C-8Abbildung C-10 Copyright & Trademarks But what does all of this mean? Wireless Access Point Router with 4-Port SwitchLAN ports. Repeat this process Proceed to Configure the PCs on the nextConnect the Router Connect an Ethernet cable toIf Windows asks you to restart your PC Configure the PCsCheck Never Dial Up a Connection. E. Click the Apply button 101 Configure the Router Unique name For Your103 105 Change / activate passwordsActivate WEP Activate MAC-address control listService in Europe, check with your ISP for Click the Apply button to save the settingClick the Apply button to save the settings Enter the Password109 111 Configuring Wireless Security113 Configuring Wireless Security in Windows XP115 117 Ssid119 Copyright 2003 Linksys, All Rights Reserved
Top Page Image Contents