Instant Wireless™ Series |
| Wireless Access Point Router with |
PPPoE
Make sure you complete the following steps.
a.Select PPPoE as the WAN Connection Type.
b.Enter the User Name and the Password you received from your ISP.
c.Click the Apply button follow by the Continue button to save the settings.
d.Click the Status tab, followed by the Connect button, to start the connection.
E3
E.If you haven’t already done so, click the Apply button to save the settings.
F.Reset the power on your DSL modem and restart your computers. They will now obtain the Router's new settings.
Note: You only need to configure the Router from one computer. If you need advanced setting information, please refer to the Linksys support website at support.linksys.com
Congratulations! You’ve suc- cessfully configured the Router. You can test the setup by opening your web browser from any computer and entering www.linksys.com/registration.
If you are unable to reach our website, you may want to review what you did in this section or refer to the Help section in this Fast Start guide.
E5
102 | 103 |