RangeMax Dual Band
•Shared Key. This is shared between the wireless access point and the Radius server during authentication.
7.To save your settings, click Apply.
Using Push 'N' Connect (WPS) to Configure Your Wireless Network
If your wireless clients support
securely and easily to the modem router. Look for the symbol on your client device (computers that will connect wirelessly to the modem router are clients). WPS automatically configures the network name (SSID) and wireless security settings for the modem router (if the modem router is in its default state) and broadcasts these settings to the wireless client.
Note: NETGEAR’s Push 'N' Connect feature is based on the
Some considerations regarding WPS are:
•WPS supports only
•If your wireless network will include a combination of WPS capable devices and
A WPS client can be added using the Push Button method or the PIN method.
•Using the Push Button. This is the preferred method. See the following section, “Using a WPS Button to Add a WPS Client.
•Entering a PIN. For information about using the PIN method, see “Using PIN Entry to Add a WPS Client” on page
Safeguarding Your Network |