NETGEAR DGND3300 user manual Universal Plug and Play, Common MTU Sizes, Application

Page 97

RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual

If you suspect an MTU problem, a common solution is to change the MTU to 1400. If you are willing to experiment, you can gradually reduce the MTU from the maximum value of 1500 until the problem goes away. Table 6-2describes common MTU sizes and applications.

Table 6-2. Common MTU Sizes

MTU

Application

 

 

1500

The largest Ethernet packet size and the default value. This is the typical setting for non-

 

PPPoE, non-VPN connections, and is the default value for NETGEAR routers, adapters,

 

and switches.

 

 

1492

Used in PPPoE environments.

 

 

1472

Maximum size to use for pinging. (Larger packets are fragmented.)

 

 

1468

Used in some DHCP environments.

 

 

1460

Usable by AOL if you don't have large e-mail attachments, for example.

 

 

1436

Used in PPTP environments or with VPN.

 

 

1400

Maximum size for AOL DSL.

 

 

576

Typical value to connect to dial-up ISPs.

 

 

To change the MTU size:

1.In the main menu, under Advanced, select WAN Setup.

2.In the MTU Size field, enter a new size between 64 and 1500.

3.Click Apply to save the new configuration.

Universal Plug and Play

Universal Plug and Play (UPnP) helps devices, such as Internet appliances and computers, to access the network and connect to other devices as needed. UPnP devices can automatically discover the services from other registered UPnP devices on the network.

Note: If you use applications such as multiplayer gaming, peer-to-peer connections, real- time communications such as instant messaging, or remote assistance (a feature in

Windows XP), you should enable UPnP.

Fine-Tuning Your Network

6-7

v1.0, March 2009

Image 97
Contents NETGEAR, Inc Trademarks Product Registration, Support, and DocumentationStatement of Conditions Certificate of the Manufacturer/ImporterEurope EU Declaration of Conformity FCC Guidelines for Human Exposure FCC Information to UserFCC Radio Frequency Interference Warnings & Instructions FCC Declaration Of ConformityProduct and Publication Details Contents Chapter Protecting Your Network Appendix B Related Documents Index V1.0, March Conventions, Formats, and Scope About This ManualHow to Print This Manual How to Use This ManualPublication Revision History Revision HistoryVersion Date Description V1.0 March Original publication Xiv Using the Setup Manual Chapter Configuring Your Internet ConnectionDocument in Preparing Your Network in Appendix B Logging In to Your Modem RouterV1.0, March Using the Setup Wizard Viewing or Manually Configuring Your ISP Settings ISP does not require login Settings Description Basic Settings screen fieldsGet Automatically from ISP. Your ISP uses Dhcp to Xxxxxxxxxxxx Configuring Adsl SettingsV1.0, March V1.0, March Planning Your Wireless Network Chapter Safeguarding Your NetworkSee Manually Configuring Your Wireless Settings on Wireless Placement and Range GuidelinesWireless data Security options Range up to 300 foot radius Wireless Security OptionsManually Configuring Your Wireless Settings Wireless Settings WPA-802.1x Configuring WEP Wireless SecurityNetwork Key 8-63 characters Security Options section, select the WEP radio button Configuring WPA, WPA2, or Mixed WPA2 + WPA Wireless Security V1.0, March Using Push N Connect WPS to Configure Your Wireless Network Using a WPS Button to Add a WPS Client Using PIN Entry to Add a WPS Client Configuring Advanced WPS Settings Adding More WPS Clients Adding Both WPS and Non-WPS Clients Enable Wireless Router Radio Restricting Access to Your Modem RouterV1.0, March V1.0, March Chapter Protecting Your Network Protecting Access to Your Modem RouterChanging the Built-In Password Restricting Access by MAC AddressSelect the Turn Access Control On checkbox Blocking Access to Internet Sites V1.0, March Firewall Rules Field Outbound Rules Inbound Rules Adding or Editing Firewall Service RulesBlocking Access to Internet Services V1.0, March Scheduling Blocking Log Entry Descriptions Viewing Logs of Web Access or Attempted Web AccessField Description Configuring E-mail Alert and Web Access Log Notifications Setting the Time V1.0, March Upgrading the Firmware Chapter Using Network Monitoring ToolsManually Checking for Firmware Upgrades V1.0, March Viewing Modem Router Status Information Dhcp Modem Router Status FieldsConnection Status Statistics Connection Status SettingsModem Router Statistics Viewing a List of Attached Devices Backing Up and Restoring the Configuration Managing the Configuration FileErasing the Configuration Running Diagnostic Utilities and Rebooting the Modem Router Select the Turn Remote Management On check box Enabling Remote Management AccessV1.0, March V1.0, March Using the LAN Setup Options Chapter Customizing Your Network SettingsSettings LAN SetupLAN TCP/IP Address Reservation Using the Modem Router as a Dhcp ServerUsing a Dynamic DNS Service Select the Use a Dynamic DNS Service check box WAN Setup Settings Configuring the WAN Setup OptionsSetting Description WAN Port Setting Up a Default DMZ ServerConfiguring QoS for Internet Access Setting up Quality of Service QoSQoS for Applications and Online Gaming QoS for a Router LAN Port QoS for a MAC Address Editing or Deleting an Existing QoS Policy Configuring Static Routes V1.0, March Wireless Repeating Also Called WDS Wireless Repeating Function Setting Up the Base Station Fill in the Base Station MAC Address field Setting Up a Repeater UnitV1.0, March Chapter Fine-Tuning Your Network Assessing Your Speed Requirements Theoretical Transfer Time for 1 Gigabyte Optimizing Your Network BandwidthNetwork Connection Theoretical Raw Transfer Time RangeMax Dual Band Wireless-N Modem Router Identify critical wireless links Optimizing Wireless PerformanceChanging the MTU Size Choose your settingsCommon MTU Sizes Universal Plug and PlayApplication V1.0, March Quick Tips Chapter TroubleshootingQuick Tips Recommendation InstructionsTroubleshooting with the LEDs Situation Recommended Action Troubleshooting with the LEDsCannot Access the Router Menu Checking the Configuration Cannot Access the InternetChecking the WAN IP Address V1.0, March Testing the LAN Path to Your Router Troubleshooting a Network Using the Ping UtilityPing -n 10 IP address Testing the Path from Your Computer to a Remote DeviceWireless Connectivity Problems with Date and TimeViewing Available Networks Using the Restore Factory Settings Button Restoring the Factory Configuration SettingsFeature Default Setting Router login Table A-1. Default Configuration SettingsInternet connection Local network LANTable A-1. Specifications Technical SpecificationsFeature Default Setting Wireless Power AdapterEnvironmental Interface SpecificationsRegulatory Compliance Document Link Appendix B Related DocumentsV1.0, March Index Index-2 Index-3 Index-4