NETGEAR DGND3300 user manual Viewing a List of Attached Devices

RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual

Table 4-3. Modem Router Statistics (continued)

Item		Description
	Status	The link status of the port.
	TxPkts	The number of packets transmitted on this port since reset or manual clear.
	RxPkts	The number of packets received on this port since reset or manual clear.
	Collisions	The number of collisions on this port since reset or manual clear.
	Tx B/s	The current transmission (outbound) bandwidth used on the WAN and LAN ports.
	Rx B/s	The current reception (inbound) bandwidth used on the WAN and LAN ports.
	Up Time	The time elapsed since this port acquired the link.
Poll Interval		The intervals at which the statistics are updated in this screen.

•To change the polling frequency, enter a time in seconds in the Poll Interval field, and click Set Interval.

•To stop the polling, click Stop.

Viewing a List of Attached Devices

The Attached Devices table lists all IP devices that the modem router has discovered on the local network. From the main menu, under Maintenance, select Attached Devices to view the table.

Figure 4-7

For each device, the table shows the IP address, NetBIOS host name or device name (if available), and the Ethernet MAC address. To force the modem router to look for attached devices, click Refresh.

Note: If the router is rebooted, the table data is lost until the modem router rediscovers the devices.

4-8 Using Network Monitoring Tools

v1.0, March 2009