NETGEAR DGND3300 user manual FCC Declaration Of Conformity

Page 5

FCC Declaration Of Conformity

We NETGEAR, Inc., 4500 Great America Parkway, Santa Clara, CA 95054, declare under our sole responsibility that the model DGND3300 RangeMax Dual Band Wireless-N Modem Router complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:

•This device may not cause harmful interference, and

•This device must accept any interference received, including interference that may cause undesired operation.

FCC Radio Frequency Interference Warnings & Instructions

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following methods:

•Reorient or relocate the receiving antenna

•Increase the separation between the equipment and the receiver

•Connect the equipment into an electrical outlet on a circuit different from that which the radio receiver is connected

•Consult the dealer or an experienced radio/TV technician for help.

RangeMax Dual Band Wireless-N Modem Router

Tested to Comply with FCC Standards

FOR HOME OR OFFICE USE

Modifications made to the product, unless expressly approved by NETGEAR, Inc., could void the user's right to operate the equipment.

Maximum Wireless Signal Rate Derived from IEEE Standard 802.11 Specifications

Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.

v

v1.0, March 2009

Image 5

Contents NETGEAR, Inc Trademarks Product Registration, Support, and DocumentationStatement of Conditions Certificate of the Manufacturer/ImporterEurope EU Declaration of Conformity FCC Guidelines for Human Exposure FCC Information to UserFCC Radio Frequency Interference Warnings & Instructions FCC Declaration Of ConformityProduct and Publication Details Contents Chapter Protecting Your Network Appendix B Related Documents Index V1.0, March Conventions, Formats, and Scope About This ManualHow to Print This Manual How to Use This ManualVersion Date Description V1.0 March Original publication Revision HistoryPublication Revision History Xiv Using the Setup Manual Chapter Configuring Your Internet ConnectionDocument in Preparing Your Network in Appendix B Logging In to Your Modem RouterV1.0, March Using the Setup Wizard Viewing or Manually Configuring Your ISP Settings ISP does not require login Get Automatically from ISP. Your ISP uses Dhcp to Basic Settings screen fieldsSettings Description Xxxxxxxxxxxx Configuring Adsl SettingsV1.0, March V1.0, March Planning Your Wireless Network Chapter Safeguarding Your NetworkSee Manually Configuring Your Wireless Settings on Wireless Placement and Range GuidelinesWireless data Security options Range up to 300 foot radius Wireless Security OptionsManually Configuring Your Wireless Settings Wireless Settings Network Key 8-63 characters Configuring WEP Wireless SecurityWPA-802.1x Security Options section, select the WEP radio button Configuring WPA, WPA2, or Mixed WPA2 + WPA Wireless Security V1.0, March Using Push N Connect WPS to Configure Your Wireless Network Using a WPS Button to Add a WPS Client Using PIN Entry to Add a WPS Client Configuring Advanced WPS Settings Adding More WPS Clients Adding Both WPS and Non-WPS Clients Enable Wireless Router Radio Restricting Access to Your Modem RouterV1.0, March V1.0, March Chapter Protecting Your Network Protecting Access to Your Modem RouterChanging the Built-In Password Restricting Access by MAC AddressSelect the Turn Access Control On checkbox Blocking Access to Internet Sites V1.0, March Firewall Rules Field Outbound Rules Inbound Rules Adding or Editing Firewall Service RulesBlocking Access to Internet Services V1.0, March Scheduling Blocking Field Description Viewing Logs of Web Access or Attempted Web AccessLog Entry Descriptions Configuring E-mail Alert and Web Access Log Notifications Setting the Time V1.0, March Upgrading the Firmware Chapter Using Network Monitoring ToolsManually Checking for Firmware Upgrades V1.0, March Viewing Modem Router Status Information Dhcp Modem Router Status FieldsConnection Status Modem Router Statistics Connection Status SettingsStatistics Viewing a List of Attached Devices Backing Up and Restoring the Configuration Managing the Configuration FileErasing the Configuration Running Diagnostic Utilities and Rebooting the Modem Router Select the Turn Remote Management On check box Enabling Remote Management AccessV1.0, March V1.0, March Using the LAN Setup Options Chapter Customizing Your Network SettingsSettings LAN SetupLAN TCP/IP Address Reservation Using the Modem Router as a Dhcp ServerUsing a Dynamic DNS Service Select the Use a Dynamic DNS Service check box Setting Description Configuring the WAN Setup OptionsWAN Setup Settings WAN Port Setting Up a Default DMZ ServerConfiguring QoS for Internet Access Setting up Quality of Service QoSQoS for Applications and Online Gaming QoS for a Router LAN Port QoS for a MAC Address Editing or Deleting an Existing QoS Policy Configuring Static Routes V1.0, March Wireless Repeating Also Called WDS Wireless Repeating Function Setting Up the Base Station Fill in the Base Station MAC Address field Setting Up a Repeater UnitV1.0, March Chapter Fine-Tuning Your Network Assessing Your Speed Requirements Network Connection Theoretical Raw Transfer Time Optimizing Your Network BandwidthTheoretical Transfer Time for 1 Gigabyte RangeMax Dual Band Wireless-N Modem Router Identify critical wireless links Optimizing Wireless PerformanceChanging the MTU Size Choose your settingsApplication Universal Plug and PlayCommon MTU Sizes V1.0, March Quick Tips Chapter TroubleshootingQuick Tips Recommendation InstructionsTroubleshooting with the LEDs Situation Recommended Action Troubleshooting with the LEDsCannot Access the Router Menu Checking the WAN IP Address Cannot Access the InternetChecking the Configuration V1.0, March Testing the LAN Path to Your Router Troubleshooting a Network Using the Ping UtilityPing -n 10 IP address Testing the Path from Your Computer to a Remote DeviceWireless Connectivity Problems with Date and TimeViewing Available Networks Using the Restore Factory Settings Button Restoring the Factory Configuration SettingsFeature Default Setting Router login Table A-1. Default Configuration SettingsInternet connection Local network LANTable A-1. Specifications Technical SpecificationsFeature Default Setting Wireless Power AdapterRegulatory Compliance Interface SpecificationsEnvironmental Document Link Appendix B Related DocumentsV1.0, March Index Index-2 Index-3 Index-4