Airlink101 AR695W manual PPPoE Service Name, Assigned IP Address

Page 38

 

to the ISP after the connection is established.

 

Manually: Router will not connect to the ISP until user clicks the

 

Connect button on the Status-page.

PPPoE Service Name

Enter the DSL service company. This is optional.

Assigned IP Address

Input the IP address you wish to use. This is optional.

MTU (Maximum Transmission Unit) The most common MTU value is 1492. You can configure it as

your ISP suggested.

After you finished all settings, click Save to save the settings and click Reboot. The

change will take effect after rebooting the router.

E) PPTP

34

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Wireless N 300 Gigabit Green Router Copyright Table of Contents Status Introduction and safety information Product InformationPackage Contents Familiar with your new Gigabit Router Front PanelBack Panel Configure the Router Connect the Router to your networkPage Configure the Router with EZ Setup Wizard Select your language and click Next Click on Wizard Page Page Cable Dynamic IP Example username@sbcglobal.net Page Page Configure the Router with Web Configuration Utility Page Page For Cable Users Dynamic IP Address Click on Clone MAC Example username@sbcglobal.net Page Page Connect to Router Wirelessly Page Advanced Configuration Page Basic Setting WAN Type Primary SetupLAN IP Address Virtual ComputersPage Static IP Address Dynamic IP AddressRenew IP Forever Host NameWAN’s MAC Address Dynamic IP Address with Road Runner Session Management PasswordLogin Server AccountPPP Over Ethernet PPPoE PPPoE Service Name Assigned IP AddressMy IP Address IP ModePptp Password My Subnet MaskL2TP Password L2TP AccountLocal IP EnableGlobal IP Lease Time Dhcp ServerDhcp Server IP Pool Starting/Ending AddressGateway Primary DNS/Secondary DNSPrimary WINS/Secondary Wins Client ListWireless Ssid Broadcast Wireless ModeWireless Client List ChannelConfiguring Security WEP Configuring Security WPA-PSK / WPA2-PSKConfiguring Security 802.1x and Radius Configuring Security WPA / WPA2 3.1 WDS Scanned AP’s MAC AP ModeRemote AP MAC Scan APWPS Easy Setup Button Page Page Select Enable or Disable WPS function WPS State WPS StatusNew Password Change PasswordOld Password ReconfirmForwarding Rules Well known servicesService Ports Virtual ServerNext / Previous ProtocolSchedule Rule# Trigger Special ApplicationsPopular applications Incoming PortsMiscellaneous IP Address of DMZ HostUPnP Super DMZ IP PassthroughNon-standard FTP Port Xbox SupportSecurity Setting Packet FilteringSource IP Outbound/InboundPacket Filter Destination IPPort Inbound FilterDomain Blocking Recorded in log file URL Blocking URL BlockingInternet Access Control Page Association Control MAC Access ControlMAC Address Control Previous / Next Dhcp ClientsMAC Address Add MAC Address Group MAC Access ControlGroup MAC Access Control Interface Interface Access ControlInterface Access Control Schedule Rule DenyDoS Attack Detection SPI ModeDiscard Ping from WAN side VPN Pptp Pass-ThroughSystem Time Advanced SettingSelect Set Date and Time using PC’s Date and Time Select Get Date and Time by NTP ProtocolTime Server System TimeSync Now Time ZoneEmail Alert System LogIP Address of Syslog Server Send Mail NowUsername Email AddressesEmail Subject Log TypeProvider Password / KeyDynamic DNS Provider WebsiteQoS Rule QoS ControlQoS Priority Remote IP AddressPorts Snmp Routing AR695W Dynamic RoutingSubnet Mask Static RoutingDestination HopRule# Schedule RuleSchedule Rule NameStart Time/End Time hhmm Name of Rule#Week Day Toolbox View Log Firmware Upgrade Backup Setting Reset to DefaultReboot Domain Name or IP Address for Ping Test Status Wireless Status System StatusStatistics Information NAT StatusHardware Specification Technical Support
Top Page Image Contents