Airlink101 AR695W manual Protocol, Schedule Rule#, Next / Previous

Protocol	This is the protocol type to be forwarded. You can choose to
	forward “TCP” or “UDP” packets only or select “Both” to forward
	both “TCP” and “UDP” packets.
Enable	Check to enable this forwarding rule.
Schedule Rule#	Enter a Schedule Rule number to enable the forwarding rule only
	within the desired time frame. Please refer to 3.4.7 Schedule
	Rule for detailed setting instructions. You can set 0 to enable the
	forwarding rule always. If you assign a schedule rule (for example,
	9am to 5pm) to ID#1, users are only allowed to access the FTP
	server from 9am to 5pm.
Next>> / Previous<<	Access the next/previous 10 port forwarding rules.

Click Save after you finished all settings.

54