Airlink101 AR695W manual Dhcp Server, Lease Time, IP Pool Starting/Ending Address, Domain Name

Page 42

3.1.2 DHCP Server

This page allows you to configure the DHCP settings for your router.

Parameter

Description

 

 

DHCP Server

Select Disable or Enable the DHCP server.

Lease Time

DHCP lease time to the DHCP client. Please enter a number

 

between 5 to 10080. 10080 Minutes = 7 days.

IP Pool Starting/Ending Address

Whenever there is a request from a network client, the DHCP

 

server will automatically allocate an unused IP address from the

 

IP address pool to the requesting computer. You must specify a

 

range by entering the starting / ending address of the IP address

 

pool.

Domain Name

This is optional, this information will be passed to the client.

Press “More>>” for more options

 

38

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Wireless N 300 Gigabit Green Router Copyright Table of Contents Status Introduction and safety information Product InformationPackage Contents Familiar with your new Gigabit Router Front PanelBack Panel Configure the Router Connect the Router to your networkPage Configure the Router with EZ Setup Wizard Select your language and click Next Click on Wizard Page Page Cable Dynamic IP Example username@sbcglobal.net Page Page Configure the Router with Web Configuration Utility Page Page For Cable Users Dynamic IP Address Click on Clone MAC Example username@sbcglobal.net Page Page Connect to Router Wirelessly Page Advanced Configuration Page Basic Setting WAN Type Primary SetupLAN IP Address Virtual ComputersPage Static IP Address Dynamic IP AddressHost Name WAN’s MAC AddressRenew IP Forever Dynamic IP Address with Road Runner Session Management PasswordLogin Server AccountPPP Over Ethernet PPPoE PPPoE Service Name Assigned IP AddressMy IP Address IP ModePptp Password My Subnet MaskL2TP Password L2TP AccountEnable Global IPLocal IP Lease Time Dhcp ServerDhcp Server IP Pool Starting/Ending AddressGateway Primary DNS/Secondary DNSPrimary WINS/Secondary Wins Client ListWireless Ssid Broadcast Wireless ModeWireless Client List ChannelConfiguring Security WEP Configuring Security WPA-PSK / WPA2-PSKConfiguring Security 802.1x and Radius Configuring Security WPA / WPA2 3.1 WDS Scanned AP’s MAC AP ModeRemote AP MAC Scan APWPS Easy Setup Button Page Page Select Enable or Disable WPS function WPS State WPS StatusNew Password Change PasswordOld Password ReconfirmForwarding Rules Well known servicesService Ports Virtual ServerProtocol Schedule Rule#Next / Previous Trigger Special ApplicationsPopular applications Incoming PortsMiscellaneous IP Address of DMZ HostUPnP Super DMZ IP PassthroughNon-standard FTP Port Xbox SupportSecurity Setting Packet FilteringSource IP Outbound/InboundPacket Filter Destination IPPort Inbound FilterDomain Blocking Recorded in log file URL Blocking URL BlockingInternet Access Control Page MAC Access Control MAC Address ControlAssociation Control Dhcp Clients MAC AddressPrevious / Next Group MAC Access Control Group MAC Access ControlAdd MAC Address Interface Access Control Interface Access ControlInterface Schedule Rule DenyDoS Attack Detection SPI ModeDiscard Ping from WAN side VPN Pptp Pass-ThroughSystem Time Advanced SettingSelect Set Date and Time using PC’s Date and Time Select Get Date and Time by NTP ProtocolTime Server System TimeSync Now Time ZoneEmail Alert System LogIP Address of Syslog Server Send Mail NowUsername Email AddressesEmail Subject Log TypeProvider Password / KeyDynamic DNS Provider WebsiteQoS Rule QoS ControlRemote IP Address PortsQoS Priority Snmp Routing AR695W Dynamic RoutingSubnet Mask Static RoutingDestination HopRule# Schedule RuleSchedule Rule NameName of Rule# Week DayStart Time/End Time hhmm Toolbox View Log Firmware Upgrade Backup Setting Reset to DefaultReboot Domain Name or IP Address for Ping Test Status Wireless Status System StatusStatistics Information NAT StatusHardware Specification Technical Support
Top Page Image Contents