Airlink101 AR695W manual Configuring Security WEP, Configuring Security WPA-PSK / WPA2-PSK

Configuring Security - WEP

Note: IEEE802.11n only supports WPA2-PSK or WPA-PSK AES encryption. If you use WEP as your encryption, wireless data rate will drop to 54Mbps (802.11g standard).

Key Mode: Select HEX or ASCII. You can select ASCII (alphanumeric format) or Hexadecimal (in the “a~f” and “0~9” range) for the key format.

WEP: Select 64 bits or 128 bits key length.

Key 1~4: Select a WEP Key you wish to use and enter key value.

If you select HEX and 64 bits, enter a 10-digit Hex key, for example, “12345abcde”.

If you select ASCII and 64 bits, enter a 5-digit ASCII key, for example, “xyz01”.

If you select HEX and 128 bits, enter a 26-digit Hex key, for example, “12345abcde67890bcdef123456”.

If you select ASCII and 128 bits, enter a 13-digit ASCII key, for example, “wepkeyexample”.

Configuring Security - WPA-PSK / WPA2-PSK

Wi-Fi Protected Access (WPA) is an advanced security standard. You can use a pre-shared key (PSK) to authenticate wireless stations and encrypt data during

42