ADTRAN IPR-S1000 manual Overview, Basic screens, Example 12.379 27500K + Auto 11.0dB

Configuring the IPR-S1000

Configuring the IPR-S1000

I The LCD interface

This chapter describes how to use the Liquid Crystal Display interface to manage the IPR-S1000. The LCD interface is mostly useful for the initial configuration. After that configuration, we strongly advise you to use the Web or Telnet interface. Indeed, these two interfaces will allow you to configure the IPR-S1000 in a more complete way.

1. Overview

To select each element of the menu, press the «up» and/or «down» arrows. The «right» arrow, showing at the edge of the screen line, points out the selected element. To return to the previous screen, press the «left» arrow. To enter the selected element, press the «right» arrow.

During a traditional data entry (numerical or textual), the «right» arrow moves the cursor on to the next right character, or to the next data field, if positioned on the last character in row. The «left» arrow moves the cursor on to the next left character or to the next data field if positioned at the first character of the line. The function keys «+» and «-»allow to change the character currently covered by the cursor. Most of the time, the «up» arrow cancels the current selection, whereas the «down» arrow confirms it.

2. Basic screens

After the IPR-S1000 connection, three screens appear on the LCD. They are linked together with a five seconds delay between each of them. You cannot do any modifications on them.

DVB

The first screen displays satellite reception conditions.

Example:

12.379 V

27500K

+Auto 11.0dB

Note: To go to the Main menu, press any key.

10