ADTRAN IPR-S1000 manual Auth Authentication, Dvb Digital Video Broadcasting

Page 87

Configuring the IPR-S1000

display_which_bytes: The number of displayed octets for each packet.

display_which_pkts: The interveal of packages between two postings.

ftp_addr: Access parameters to FTP server which will store TS flow. Necessary only if FTP is selected.

ftp_login: Access parameters to FTP server which will store TS flow. Necessary only if FTP is selected.

ftp_passwd: Access parameters to FTP server which will store TS flow. Necessary only if FTP is selected.

ftp_path: Access parameters to FTP server which will store TS flow. Necessary only if FTP is selected.

ftp_port: Access parameters to FTP server which will store TS flow. Necessary only if FTP is selected.

mode_ftp: Selects the FTP mode of analysis.

mode_hexa: Screen select mode (hexadecimal format).

mode_hexaline: Screen select mode (hexaline format).

mode_hexdump: Screen select mode (hexdump format).

mode_stat: Displays statistics only, not packets.

pid_list: This mandatory field must be filled in by a list of Program stream IDentifier (PID). The PID minimum value is 0 and its maximum value is 8191.

pkt_count: The program will stop after receiving this number of TS packets.

timeout: The program will stop after this number of seconds.

Note: With the Shell interface it is possible not to set a timeout nor a packet count limit. The user can then stop the program at any time using CTRL C.

With the read login:

auth (Authentication)

Allows to change the authentication level, i.e to switch to the public, read or write level. A password is needed only when switching to a more restricted level.

read: Allows to read the whole IPR-S1000 set up. The user cannot configure the IPR-S1000.

write: Allows a complete configuration access, and allows to change the set up parameters.

bye

Allows to exit the shell.

dvb (Digital Video Broadcasting)

Real-time access to the DVB interface.

dlevel: Digital level in percent.

82

Image 87

Contents USER’S Guide Acknowledgements Page Installing the IPR-S1000 Telnet interface Document conventions Document objectivesAudience Document organizationMaterial verification Safety recommendationsTerms and abbreviations Obtaining technical assistanceEnsure your safety Installation checklist Site requirementsProtect the equipment Connecting the power cord Connecting the cablesConnecting to the Ethernet network Connecting to the satellite antennaMaking an initial configuration of the IPR-S1000 Starting up the IPR-S1000Making the connection IP address FEC LNB Power Overview Basic screensExample 12.379 27500K + Auto 11.0dB Example 1002 0x3ea 11KP10MB Menu Set configMain menu Example Ethernet 192.168.43.48/2411C 11D MAC filteringDVB Example High Band Low band Universal LNBExample Frequency 12.3790000GHz Example FEC Auto 1/2 2/3 3/4 4/5 5/6 6/7 7/8 8/9 Example Bauds KbaudsExample Polarization Vert./RHCP/14v Horiz./LHCP/18v Example ModulationPSK 16 QAM Example LNB Power Off Example DVB IP address 172.022.000.051/24Example Start MPE PID 1002 0x3ea Example Processing CRC MPE Yes Example Stop MPE PID 1002 0x3ea 3032 0xbd8Example MAC address filtering on 6 bytes Ethernet IP address Media typeEthernet 13. IP Example IP address 192.168.043.048/24Example Broadcast bridging Yes Example Unicast forwarding Routing BridgingMulticast On/Off Example Mcast forwarding Accept src addrMcast forwarding Yes routing Yes bridging New network address 000.000.000.000/00DNS 1 DNS 2 Example Bridging traffic Bridge only Analyse & bridgeExample Icmp redirect Yes Example Def. none Edit Delete Example Delete all routes? CancelOkProfiles Save Fact. profile Tftp load Tftp save Example Profile nameProfiles Example Tftp Server addr Factory profile Startup LoadNew write password New read passwordReceipt code DVB MAC address 00D0B5XXXXXX Menu View Config12.379 27500K + Auto 5.6dB Active MPE PID 1002 0x3 eaMonitoring Unlock Vber 1.3 E Uncor. packets Reset ?Temperature 35.3 C Example Really reboot? ? CancelVersion FirmwareQPSK S1000-3.01.41aMain Configuring the IPR-S1000 Configuring the IPR-S1000 Profiles and passwords Load Management System Reboot DVB Field, enter the low band local oscillator Interface Tuner Ethernet Definition This module allows you to manage IP parameters Forwarding User Interface Fixed Key Conditionnal Access Snmp Snmp traps Syslog Bandwidth IP Crypt Firewall Mac addresses NAT Drop-down menu, select active to start NAT PPP Configuring the IPR-S1000 Configuring the IPR-S1000 Pptp Configuring the IPR-S1000 Udlr Drop-down menu, select active to start Udlr Spectrum ToolsTS Dump Configuring the IPR-S1000 DVB Dump IP Dump Configuring the IPR-S1000 Ethernet Ping Traceroute You are trying to reach is actually operatingBlank field, enter the hostname or IP address Network statistics Shell III The Telnet interfaceExample + name of the profile CommandsDelete + name of the profile to be removed Auth AuthenticationAbort ByeHelp GetdefaultExit Get section.attributLoadfactory LastprofileList Load + name of the profileRename + formername newname Ppp Point to point protocol Acts on PPP processPptp point to point tuneling protocol QuitTsdump TftploadTftpsave Traceroute + IP address or «Host» nameDvb Digital Video Broadcasting Get Displays NAT information System System action Traceroute + IP address or «host» name Sections and attributes Bandwidth.sizeDvb.bauds Dvb.freq Dvb.crcmpeDvb.dvbipaddr Dvb.fecDvb.scanfreq Dvb.mpepids List of MPE PIDs Dvb.mtuDvb.polar Dvb.relaxbaudsIp.multicast Ip.keepforusIp.macaddr Ip.mcastaddrNat.dynactive Ppp.passwordNat.autoifaceactive Nat.autoifaceifacePptp.retrytimer Pptp.connecttimerPptp.keepalivetimer Pptp.password Contains the password Pptp.pnsIV. The Snmp interface Glossary CRC DRO Iana ISO MPE Pstn RIP Vsat IPricotSA