ADTRAN IPR-S1000 manual Example Polarization Vert./RHCP/14v Horiz./LHCP/18v, Example Modulation

Configuring the IPR-S1000

3)With the «down» arrow, select «115. Polarization», and enter that menu by pressing the «right» arrow.

Example:

Polarization:

Vert./RHCP/14v

Horiz./LHCP/18v

Note: Vert./RHCP/14v stands for «Vertical / Right Hand Circular Polarization» and Horiz/LHCP/18v stands for «Horizontal / Left Hand Circular Polarization»

4)With the «+» or «-»key, select a polarization type.

5)Confirm the selection by pressing the «down» arrow.

116. Modulation

The process, or result of the process, of varying a characteristic of a carrier, in accordance with an information-bearing signal.

This screen allows you to select a type of modulation.

1)In the «1. Set config» menu, select «11. DVB».

2)Enter that menu by pressing the «right» arrow.

3)With the «down» arrow, select «116. Modulation», and enter that menu by pressing the «right» arrow.

Example:

Modulation:

QPSK

8PSK 16 QAM

Note: QPSK is the only available modulation on the IPR-S1000

4)With the «+» or «-»key, select a type of modulation.

5)Confirm the selection by pressing the «down» arrow.

117. LNB Power

This screen allows you to enable or disable LNB Power.

1)In the «1. Set config» menu, select «11. DVB».

2)Enter that menu by pressing the «right» arrow.

15