Configuring the
3)With the «down» arrow, select «117. LNB Power», and enter that menu by pressing the «right» arrow.
Example:
LNB Power:
On
Off
4)With the «+» or
5)Confirm the selection by pressing the «down» arrow.
118. DVB IP address
This screen allows you to set the DVB IP address.
1)In the «1. Set config» menu, select «11. DVB».
2)Enter that menu by pressing the «right» arrow.
3)With the «down» arrow, select «118. DVB IP address», and enter that menu by pressing the «right» arrow.
Example:
DVB IP address: 172.022.000.051/24
4)Enter the DVB IP address
5)Confirm the value by pressing the «down» arrow.
119. Start MPE
This screen allows you to start up the new MPE PID reception.
1)In the «1. Set config» menu, select «11. DVB».
2)Enter that menu by pressing the «right» arrow.
3)With the «down» arrow, select «119. Start MPE», and enter that menu by pressing the «right» arrow.
Example:
Start MPE PID: 0032
1002 (0x3ea)...
4)Enter a value using the same method that you used to set the IP address.
5)Confirm the value by pressing the «down» arrow.
11A. Stop MPE
This screen allows you to stop the reception of a MPE PID.
16