ADTRAN IPR-S1000 manual Connecting the cables, Inserting the Multimedia Card MMC

Page 10

Installing the IPR-S1000

IIIInstalling the IPR-S1000

1.Connecting the cables

The appropriate cables are necessary to connect the IPR-S1000 to the Ethernet network as well as to the satellite antenna. Refer to the following list and illustrations to correctly locate the different connectors.

Connectors

-Ethernet 10/100 Mbps RJ45 connector

-Coaxial satellite connector, F type.

-DB-9 serial connector (console / modem).

Making the connection

Note: To help you making the connection, refer to the illustration on the next page.

- Inserting the Multimedia Card (MMC)

Before inserting the MMC into the slot, make sure the card is correctly oriented. The right notch of the MMC must be directed towards the slot.

Note: If the MMC is not properly inserted, the unit will not boot and

the LCD screen will say «IPR-S1000, Booting: Wait...».

- Connecting to the Ethernet network

Connect an Ethernet cable to the Ethernet connector.

Note: For better results, use a Shielded Twisted Pair (STP) category 5 cable.

- Connecting to the satellite antenna

Connect the satellite antenna using the F type connector on the back of the equipment.

Note: Make sure the cable is inserted and secured by tightening the connector.

- Connecting the power cord

Connect the power cord.

Do not extract the MMC when the power is ON. It can cause damage to the equipment.

5

Image 10

Contents USER’S Guide Acknowledgements Page Installing the IPR-S1000 Telnet interface Document organization Document objectivesAudience Document conventionsObtaining technical assistance Safety recommendationsTerms and abbreviations Material verificationEnsure your safety Site requirements Installation checklistProtect the equipment Connecting to the satellite antenna Connecting the cablesConnecting to the Ethernet network Connecting the power cordStarting up the IPR-S1000 Making an initial configuration of the IPR-S1000Making the connection IP address FEC LNB Power Basic screens OverviewExample 12.379 27500K + Auto 11.0dB Example Ethernet 192.168.43.48/24 Menu Set configMain menu Example 1002 0x3ea 11KP10MB11D MAC filtering 11CDVB High Band Low band Universal LNB ExampleExample Frequency 12.3790000GHz Example Bauds Kbauds Example FEC Auto 1/2 2/3 3/4 4/5 5/6 6/7 7/8 8/9Example Modulation Example Polarization Vert./RHCP/14v Horiz./LHCP/18vPSK 16 QAM Example DVB IP address 172.022.000.051/24 Example LNB Power OffExample Start MPE PID 1002 0x3ea Example Stop MPE PID 1002 0x3ea 3032 0xbd8 Example Processing CRC MPE YesEthernet IP address Media type Example MAC address filtering on 6 bytesEthernet Example IP address 192.168.043.048/24 13. IPExample Unicast forwarding Routing Bridging Example Broadcast bridging YesNew network address 000.000.000.000/00 Example Mcast forwarding Accept src addrMcast forwarding Yes routing Yes bridging Multicast On/OffExample Bridging traffic Bridge only Analyse & bridge DNS 1 DNS 2Example Icmp redirect Yes Example Delete all routes? CancelOk Example Def. none Edit DeleteExample Profile name Profiles Save Fact. profile Tftp load Tftp saveProfiles Factory profile Startup Load Example Tftp Server addrNew read password New write passwordReceipt code Active MPE PID 1002 0x3 ea Menu View Config12.379 27500K + Auto 5.6dB DVB MAC address 00D0B5XXXXXXMonitoring Example Really reboot? ? Cancel Uncor. packets Reset ?Temperature 35.3 C Unlock Vber 1.3 EFirmwareQPSK S1000-3.01.41a VersionMain Configuring the IPR-S1000 Configuring the IPR-S1000 Profiles and passwords Load Management System Reboot DVB Field, enter the low band local oscillator Interface Tuner Ethernet Definition This module allows you to manage IP parameters Forwarding User Interface Fixed Key Conditionnal Access Snmp Snmp traps Syslog Bandwidth IP Crypt Firewall Mac addresses NAT Drop-down menu, select active to start NAT PPP Configuring the IPR-S1000 Configuring the IPR-S1000 Pptp Configuring the IPR-S1000 Udlr Drop-down menu, select active to start Udlr Tools SpectrumTS Dump Configuring the IPR-S1000 DVB Dump IP Dump Configuring the IPR-S1000 Ethernet Ping You are trying to reach is actually operating TracerouteBlank field, enter the hostname or IP address Network statistics III The Telnet interface ShellCommands Example + name of the profileBye Auth AuthenticationAbort Delete + name of the profile to be removedGet section.attribut GetdefaultExit HelpLoad + name of the profile LastprofileList LoadfactoryQuit Ppp Point to point protocol Acts on PPP processPptp point to point tuneling protocol Rename + formername newnameTraceroute + IP address or «Host» name TftploadTftpsave TsdumpDvb Digital Video Broadcasting Get Displays NAT information System System action Traceroute + IP address or «host» name Bandwidth.size Sections and attributesDvb.bauds Dvb.fec Dvb.crcmpeDvb.dvbipaddr Dvb.freqDvb.relaxbauds Dvb.mpepids List of MPE PIDs Dvb.mtuDvb.polar Dvb.scanfreqIp.mcastaddr Ip.keepforusIp.macaddr Ip.multicastNat.autoifaceiface Ppp.passwordNat.autoifaceactive Nat.dynactivePptp.password Contains the password Pptp.pns Pptp.connecttimerPptp.keepalivetimer Pptp.retrytimerIV. The Snmp interface Glossary CRC DRO Iana ISO MPE Pstn RIP Vsat IPricotSA