ADTRAN T1-FT1 user manual Four Opening Menu Functions

Page 43

Chapter 3. Operation

The opening menu is the access point to all other operations. There are four main menu items, 1)STATUS, 2)CONFIGURE, 3)UTILITY, 4)TEST. Each main menu item has several functions and submenus to identify and access specific parameters. In the discussions that follow, each main menu contains a complete menu diagram to identify the location of each operation.

The Four Opening Menu Functions

STATUS

The Status menu provides the ability to view the status of the TSU operation. This menu includes the following sub-items.

NI PERF RPTS

Used to view the user’s set of data on the Network Interface Performance Reports in compliance with ANSI T1.403 and AT&T Document TR54016.

CURR ERR/ALM

Used to view current errors/alarms which are being reported by the TSU.

ERR/ALM HIST

Used to view and clear history errors and alarms.

CONFIG

The Configuration menu is used to set the TSU's operational configuration. This menu includes the following sub-items.

NETWORK (NI)

Used to set all of the parameters associated with the network interface.

UNIT

Used to control TSU’s control port baud rate and to setup the dial out function.

PORT

Used to configure the parameters associated with the V.35 port.

61200060L1-1

TSU User Manual

3-7

Image 43

Contents Part Number 1200060L1 T1-FT1 Data/Channel Service UnitPage Iii REN/SOC FIC Usoc ServicePage Important Safety Instructions Warranty and Customer Service Viii Table of Contents Operation Index Index-1 Table of Contents Xii List of Figures Figure A-1 TSU Complete Menu DiagramList of Figures List of Tables List of Tables Introduction T1 Service OfferingsT1/FT1 Overview Fractional T1 Functional Description TSU OverviewTest Jacks FunctionControl Interfaces FeaturesChain Por t Output Network InterfaceNx56/64 Serial Interface Control Port InputSnmp Three Methods of ControlFront Panel Adtran PC ProgramNetwork Timed TSU Clock SourcesDTE Clock Source DTE TimedInternal Clock Source Internal TimingSelf Tests TSU TestingLoopback Tests TSU Network LoopbacksAll Ones DTE Interface Loopbacks511 ApplicationAdtran Shipments Include InstallationUNPACK, INSPECT, Power Connection Power ConnectionPIN Name Description WiringNetwork Network Pin ConnectionControl In/Chain In Pin Connection Control In/ChainControl PIN Connection Name Description Chain Out Pin Connection Chain OutChain OUT PIN Connection PIN Ccitt Description Nx56k/64k DTEPrimary V.35 Pin Connection Nx 56k/64/ DTE PIN ConnectionSelf Test Power UP Testing and InitializationMethods of Operation OperationLCD Window CancelFront Panel Operation ALMT a T U S General Menu OperationO N F I G E T W O R K N N I T Setting the Data Field Code Z S To Exit Any Menu Field Operation or Display Viewing Display Only Data FieldsFour Opening Menus Menu StructureFour Opening Menu Functions Software Version Fact RestoreUtil TIME/DATEStatus Menu Menu OperationNI Perf RPTS, Submenu of 1Status 1RESET Perf Cntrs15MIN / 24HR Minutes HoursData Values State Active/Inactive Alarm InvestigatedCurr ERR/ALM Submenu of 1Status ERR/ALM Hist Submenu of 1Status Clear HistoryComplete Configuration Menu ConfigurationO R M a T Code Z S Network NI Submenu of 2 ConfigXmit PRM UNIT, Submenu of 2 Config O N T R O L P O R T Alarm SCntrl Port Data Rate AlarmsRate 56/64 PORT, Submenu of Config# of Chan Normal Mode of Operation1Time/Date, Submenu of 3Util UtilKeystroke Summary for Editing Time/Date M E 0 5 0 7 0 T E 0 8 / 0 5 / 93Reinit Unit, Submenu of 3Util 2Software Rev, Submenu of 3UtilE I N I T D D R E S S 0 0 5Fact Restore, Submenu of 3Util4Address,Submenu of 3Util Complete Test Menu Test1Network Tests, Submenu of 4Test Loopback or 3PATTERN 2Run Selftest, Submenu of 4Test R 5 1 1 Error S 5 1 1 Error S = 5T E L O O P B C K O F F S T E M S E L F T E S T3Port Tests submenu of 4Test Operation Network Interface Test Testing ExampleFar End Looped Back Test N I T O R 3 U T I LE T W O R K T E S T S U N S E L F T E S T Press Enter to activate a Remote Payload Loopback Testing Example Appendix a TSU Complete Menu Figure A-1. TSU Complete Menu DiagramAppendix A. TSU Complete Menu DTE Data Rate vs DS0s N # of DS0s N Appendix B DTE Data Rate ChartDTE Rate = 56K Appendix B. DTE Data Rate Chart Numerics IndexIndex Post-Sale Support Presales Inquiries and Applications SupportRepair and Return