NetVanta 4300/4400 Series | |
|
|
FCC-Required Information
FCC regulations require that the following information be provided in this manual:
1.This equipment complies with Part 68 of Federal Communications Commission (FCC) rules and requirements adopted by America’s Carriers Telecommunications Association (ACTA). Each registered interface has a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, provide this information to the telephone company.
2.If this equipment causes harm to the telephone network, the telephone company may temporarily discontinue service. If possible, advance notification is given; otherwise, notification is given as soon as possible. The telephone company will advise the customer of the right to file a complaint with the FCC.
3.The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the proper operation of this equipment. Advance notification and the opportunity to maintain uninterrupted service are given.
4.If experiencing difficulty with this equipment, please contact ADTRAN for repair and warranty information. The telephone company may require this equipment to be disconnected from the network until the problem is corrected, or it is certain the equipment is not malfunctioning.
5.This unit contains no
6.This equipment is designed to connect to the telephone network or premises wiring using an
7.The following information may be required when applying to the local telephone company for leased line facilities:
| Registration |
|
|
|
| |
Part Number | Number | Service Type | REN/SOC | FIC | USOC | |
|
|
|
|
|
| |
1200861L1 | US: HDCDENAN1200861L1 | 56 kbps Digital Interface | 6.0F | |||
|
| 64 kbps Digital Interface |
|
| ||
|
|
|
|
|
| |
1202843E1 | US: HDCDENAN1202843L1 | 1.544 Mbps - SF |
|
| ||
|
|
|
| |||
1202862L1 |
|
|
| |||
US: HDCDENAN1202863L1 | 1.544 Mbps - SF and B8ZS | 6.0N | ||||
1202863L1 | 1.544 Mbps - ESF | |||||
|
|
| ||||
|
| 1.544 Mbps - ESF and B8ZS |
|
| ||
1200872L1 | US: HDCDENAN1200872L1 |
|
| |||
|
|
|
| |||
|
|
|
|
|
| |
1200864L1 | US: HDCMM04A1200864L1 | Analog Loop Start | 0.4A/9.0Y | 02LS2 | ||
|
|
|
|
|
| |
1200865L1 | US: HDCDENAN1200865L1 | Basic Rate ISDN | 6.0F | 02IS5 | ||
|
|
|
|
|
| |
1200869L1 | US: HDCDL01A1200869L1 | ADSL, ADSL2, ADSL2+ Modem | 0.1A | Metallic | ||
|
|
|
|
|
|
8.The ringer equivalency number (REN) is useful in determining the quantity of devices you may connect to your telephone line and still have all of those devices ring when your number is called. In most areas, the sum of the RENs of all devices should not exceed five. To be certain of the number of devices you may connect to your line as determined by the REN, call your telephone company to determine the maximum REN for your calling area.
9.This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs. Contact your state public utility commission or corporation commission for information.
Copyright © 2013 ADTRAN, Inc. | 5 |