Option Modules | NetVanta 4300/4400 Series |
|
|
Clock Source
•Network
•Internal
Diagnostics
•Network Loopbacks: Line, payload, remote
•Test Pattern Generation and Detection: QRSS, 215 - 1, 511, all ones, all zeros
Compliance
•EMC - see Electromagnetic Compatibility (EMC) Table on page 6.
•AS/ACIF S016
•ETSI TBR 12/TBR 13
•ACTA/FCC Part 68
•IC
•UL/CUL
•EN
•IEC
•AS/NZS
•RoHS Compliant (1202843E1 only) (Telecommunications exemption)
Environmental
•Operating Temperature: 0°C to 50°C
•Storage Temperature:
•Relative Humidity: 95 percent, noncondensing
Physical
•
No external CSU/DSU is needed with the T1/FT1 interface.
T1/E1 Mode DIP Switch
The T1/E1 Wide Module is shipped with the T1/E1 mode switch (located on the circuit board) set to T1. If you require E1 functionality, use your thumbnail to slide the E1 mode switch to the ON position (as shown in the figure below).
34 | Copyright © 2013 ADTRAN, Inc. |