NetVanta 4300/4400 Series | Unit Installation |
|
|
Using a USB Cellular Modem with the NetVanta USB WWAN NIM
The NetVanta USB WWAN NIM contains a Type A USB connector that supports a variety of
Visit the NetVanta USB WWAN NIM product page at www.adtran.com for a list of supported
•Always remove power from the unit prior to removing or installing a module.
• Improper installation may result in damage to the modules.
| Instructions for Installing a USB Cellular Modem in the USB WWAN NIM |
Step | Action |
1Remove power from the base unit.
2Remove the cover from the base unit’s option slot.
3Slide the USB WWAN NIM into the option slot until the module is firmly seated against the chassis.
4Secure the pins at both edges of the module.
5Restore power to the base unit.
6Refer to the quick start guide that shipped with the NetVanta USB WWAN NIM for instructions on obtaining a cellular account and activating your USB cellular modem.
An optional USB Locking Mechanism is available from ADTRAN (P/N 1700643G1) to lock the USB to the NetVanta USB WWAN NIM.
Copyright © 2013 ADTRAN, Inc. | 53 |