6 COMMAND LINE INTERFACE
USING THE COMMAND LINE INTERFACE
ACCESSING THE CLI
When accessing the management interface for the over a direct connection to the console port, or via a Telnet connection, the access point can be managed by entering command keywords and parameters at the prompt. Using the access point’s
CONSOLE CONNECTION
To access the access point through the console port, perform these steps:
1.At the console prompt, enter the user name and password. (The default user name is “admin” and the default password is “password”) When the user name is entered, the CLI displays the “Outdoor 11a Building to Building #” prompt.
2.Enter the necessary commands to complete your desired tasks.
3.When finished, exit the session with the “exit” command.
After connecting to the system through the console port, the login screen displays:
Username: admin
Password:
Outdoor 11a Building to Building #
NOTE: Command examples shown later in this chapter abbreviate the console prompt to “AP” for simplicity.