3Com 3CRWEASYA73, WL-575 manual Exit, Ping, Syntax, Command Usage

CHAPTER 6: COMMAND LINE INTERFACE

exit

This command returns to the Exec mode or exits the configuration program.

Default Setting

None

Command Mode

Any

Example

This example shows how to return to the Exec mode from the Interface

Configuration mode, and then quit the CLI session:

Outdoor 11a Building to Building (if-ethernet)#exit

Outdoor 11a Building to Building #exit

CLI session with the Access Point is now closed

Username:

ping

This command sends ICMP echo request packets to another node on the network.

Syntax

ping <host_name ip_address>

•host_name - Alias of the host.

•ip_address - IP address of the host.

Default Setting

None

Command Mode

Exec

Command Usage

•Use the ping command to see if another site on the network can be reached.

•The following are some results of the ping command:

-Normal response - The normal response occurs in one to ten seconds, depending on network traffic.

-Destination does not respond - If the host does not respond, a “timeout” appears in ten seconds.

6-10