3Com 3CRWEASYA73, WL-575 manual MAC Address Authentication

CHAPTER 6: COMMAND LINE INTERFACE

Command Mode

Exec

Example

Outdoor 11a Building to Building #show authentication

Authentication Information

===========================================================

MAC Authentication Server			: DISABLED
MAC Auth Session Timeout Value : 0 min
802.1x	supplicant	user	: DISABLED
802.1x	supplicant		: EMPTY
802.1x	supplicant	password	: EMPTY
Address Filtering			: ALLOWED

System Default : ALLOW addresses not found in filter table.

Filter Table

MAC Address	Status
-----------------	----------
00-70-50-cc-99-1a	DENIED
00-70-50-cc-99-1b	ALLOWED

=========================================================

Outdoor 11a Building to Building (config)#

MAC Address Authentication

Use these commands to define MAC authentication on the access point. For local MAC authentication, first define the default filtering policy using the address filter default command. Then enter the MAC addresses to be filtered, indicating if they are allowed or denied. For RADIUS MAC authentication, the MAC addresses and filtering policy must be configured on the RADIUS server.

Table 20 MAC Address Authentication

Command	Function	Mode	Page
address filter default	Sets filtering to allow or deny listed addresses	GC	6-79
address filter entry	Enters a MAC address in the filter table	GC	6-79
address filter delete	Removes a MAC address from the filter table	GC	6-81
mac- authentication server	Sets address filtering to be performed with local or	GC	6-81
	remote options

6-78