3Com WL-575, 3CRWEASYA73 manual Flash/File Commands, Syntax Bootfile filename

Using the Command Line Interface

Flash/File Commands

These commands are used to manage the system code or configuration files.

Table 17 Flash/File Commands

Command	Function	Mode	Page
bootfile	Specifies the file or image used to start up the system	GC	6-61
copy	Copies a code image or configuration between flash	Exec	6-62
	memory and a FTP/TFTP server
delete	Deletes a file or code image	Exec	6-63
dir	Displays a list of files in flash memory	Exec	6-64
show bootfile	Displays the name of the current operation code file	Exec	6-65
	that

booted the system

bootfile

This command specifies the image used to start up the system.

Syntax

bootfile <filename>

filename - Name of the image file.

Default Setting

None

Command Mode

Exec

Command Usage

•The file name should not contain slashes (\ or /), the leading letter of the file name should not be a period (.), and the maximum length for file names is 32 characters. (Valid characters: A-Z, a-z, 0-9, “.”, “-”, “_”)

•If the file contains an error, it cannot be set as the default file.

6-61