3.Press TEXT. The cursor appears at the 3rd line on the display.
4.Enter the text using the numeral keys (see “Text Input Chart” on Page 39).
Note: If you make a mistake, press or to move to the character you want to change.
For example input “HAM 6m” as follows:
•“H” is the second letter associated with 4 on the keypad. Press 4 then press 2.
•“A” is the first letter associated with 2 on the key- pad. Press 2 then press 1.
•“M” is the first letter associated with 6 on the key- pad. Press 6 then press 1.
•“space” Press •.
•“6” is the sixth number associated with 1 on the keypad. Press 1 then press 6.
•“m” is the first letter associated with 6 on the key- pad. Press 6 and FUNC (for the lower case set), then press 1.
5.Press ENTER to input the text.
Assigning a Text Tag to a Bank
1.Press PGM.
2.Select a channel within the desired bank by pressing MANUAL and entering the bank number (000 for bank 0 or 200 for bank 2, for example). Press MAN- UAL again, then press PGM.
3.Press FUNC then press 6. The cursor appears at the 3rd line on the display. Enter the text using the key- pad and press ENTER.
38