Changing a Search Range with One of the 60 Preprogrammed Ranges
You can replace the search range with one of the 60 pre- programmed ranges.
1.Press FUNC then press SEARCH to enter search pro- gram mode. PSR and the search bank number of the current range appear at the display’s upper left cor- ner.
2.Press 
or 
to select the desired search bank you want to replace.
3.Press FUNC then press 5.?SR and the search bank number appear at the display’s upper left corner.
Note: After you press FUNC, press 5 within about 3 seconds. Otherwise, begin over at Step 1.
4.Press 
or 
to select the preprogrammed search range.
5.Press ENTER to replace the search range.
Manually Changing a Search Range
Follow these steps to change the search range manually:
1.Press FUNC then press SEARCH to enter search pro- gram mode. PSR and a search bank number appear at the display’s upper left corner.
2.Press 
or 
to select the search bank number.
43