Radio Shack PRO-92 manual Changing the Open/Closed Mode, Mode Open Closed

Page 64

20-522.fm Page 64 Friday, September 17, 1999 12:46 PM

The open or closed mode is set in each channel storage bank. + or – is displayed under the channel storage bank’s number while scanning. Or, the status display shows the OPEN/CLOSED mode at the top line while the scanner is in manual mode or while the scanner is receiv- ing a signal during scanning.

When no ID code is programmed into the scanner, it re- ceives the signal in PL, DPL, LTR, MOT, or ED mode without regarding the open or closed mode. The scanner displays the detected ID code.

Mode

Open

Closed

 

 

 

 

 

 

PL and DPL

Accepts any PL and

Accepts only the PL

 

DPL. Displays the

or DPL stored in the

 

received tone.

channel.

 

 

 

MOT/ED/LTR

Stops on any trans-

Only stops on trans-

 

mission. If the ID is

mission if the ID is

 

stored, displays the

stored. Displays the

 

text tag, otherwise

text tag.

 

displays the talk

 

 

group ID.

 

 

 

 

Changing the Open/Closed Mode

To change the OPEN/CLOSED mode, follow these steps:

1.Press MANUAL.

2.To select the channel-storage bank, press FUNC and

or .

3.Press FUNC then press 2. Bank OPEN or Bank CLOSED appears.

4.After that message disappears, the 10th right most digit at the top of the line of the display changes from + to – or – to +.

5.Repeat Steps 2–4 for each bank.

64

Page 63 Page 65
Image 64
Page 63 Page 65
Contents PRO-92 500-Channel Portable Trunking Scanner Features Your scanner includes these special features Fm Page 4 Friday, September 17, 1999 1246 PM FCC Notice Scanning Legally Pager transmissions Scrambled or encrypted transmissionsContents Special Features Troubleshooting Using Batteries Power SourcesPreparation Fm Page 11 Friday, September 17, 1999 1246 PM Fm Page 12 Friday, September 17, 1999 1246 PM Charging Rechargeable Batteries Using AC Power Using Vehicle Power PWR DC 9V jackConnecting the Antenna Connecting AN EARPHONE/ Headphones Connecting an Optional AntennaTraffic Safety Connecting AN Extension SpeakerListening Safely Using the Belt Clip Connecting the Clone CableAbout Your Scanner Look AT the KeypadFm Page 21 Friday, September 17, 1999 1246 PM Fm Page 22 Friday, September 17, 1999 1246 PM Look AT the Display Motorola Understanding Banks Channel Storage BanksSearch Banks Low Freq Hi Freq Step Description MHz KHzGMRS/FRS Fm Page 27 Friday, September 17, 1999 1246 PM Understanding Your PRO-92’S Modes AM Mode FM ModePL Mode Coded Squelch Modes PL, DPL, and TrunkingDPL Mode LTR E. F. Johnson Mode AhhuuuMotorola Mode Edacs Mode Fm Page 34 Friday, September 17, 1999 1246 PM Turning on the Scanner and Setting Squelch OperationStoring Known Frequencies Into Channels Bank Channel ManualStoring Text Tags Assigning a Text Tag to a ChannelAssigning a Text Tag to a Bank Text Input Chart PressFinding and Storing Active Frequencies Press To Enter a Character from this GroupSearch Bank Search Range MHz Description Searching a Preprogrammed Frequency RangeCurrent Search Bank Storing a Frequency While Searching for a Specified Channel Manually Changing a Search Range Scanning the Channels Turning Channel-Storage Banks Off and OnManually Tuning a Frequency Listening to the Weather Band Deleting Frequencies from ChannelsListening to a Weather Channel Weather Alert Feature Special Features Using the Delay FunctionLocking OUT Channels or Frequencies Locking Out ChannelsReviewing the Lock-Out Channels Locking Out FrequenciesReviewing Locked-Out Frequencies Clearing a Locked-Out FrequencyClearing All Lock Out Frequencies in a Search Bank Locked-outPriority Fm Page 52 Friday, September 17, 1999 1246 PM Changing the Receive Mode Display DescriptionChanging the Frequency Step Using the AttenuatorRange MHz Search Step kHz Using the Keylock Using the Display BacklightTurning the KEY Tone on and OFF Changing the Display Contrast Cloning the Programmed Data from Scanner to ScannerTrunking Operation Understanding TrunkingProgramming Trunking Frequencies Programming Fleet MapsPress 8 and the display below appears Size CodeTalk Group ID’S Storing Talk Group ID’sTalk Group ID Hold Reviewing Locked-Out Talk Group ID’s Locking Out Talk Groups IDClearing Talk Group ID’s Open and Closed Modes Closed ModeClearing All Talk Group ID’s in One Bank Changing the Open/Closed Mode Mode Open ClosedGeneral Guide to Scanning Guide to FrequenciesUS Weather Frequencies Ham Radio FrequenciesThis scanner’s birdie frequencies in MHz are Typical Band Usage Guide to the Action BandsPrimary Usage Abbreviations Services Band AllocationMeter Amateur Band VHF Low Band- 29-50 MHz -in 5 kHz stepsMeter Amateur Band -50-54 MHz Aircraft Band- 108-137 MHzVHF High Band 148-174 MHz Public Safety Band Locally Assigned Government Band 406-420 MHzCm Amateur Band 420-450 MHz Low Band 450-470 MHzPrivate Trunked Band Frequency ConversionGeneral Trunked Band Troubleshooting Problem Possible Cause RemedyFm Page 74 Friday, September 17, 1999 1246 PM RESETTING/INITIALIZING the Scanner Resetting the ScannerReset Initializing the ScannerFm Page 76 Friday, September 17, 1999 1246 PM Care and Maintenance Specifications UHF T9V DC RadioShack
Related manuals
Manual 2 pages 49.89 Kb Manual 72 pages 29.87 Kb
Top Page Image Contents