Radio Shack PRO-92 manual Using Vehicle Power, PWR DC 9V jack

Page 15

20-522.fm Page 15 Friday, September 17, 1999 12:46 PM

2.Plug the adapter’s barrel plug into the scanner’s

PWR DC 9V jack.

3.Plug the adapter into a standard AC outlet.

Using Vehicle Power

You can power the scanner from a vehicle’s 12V power source (such as a cigarette-lighter socket) using a 9V, 300 mA DC adapter and a size H Adaptaplug (neither supplied). We recommend RadioShack Cat. No. 273- 1810 (available at your local RadioShack store).

Note: For charging batteries with an optional DC adapter from a DC power source, use RadioShack Cat. No. 273- 1825 and a size H Adaptaplug (available at your local Ra- dioShack store). Make sure the adapter’s voltage is set to 10V.

Cautions:

You must use a power source that supplies

!9V DC and delivers at least 300 mA. Its center tip must be set to negative and its

plug must fit the scanner's PWR DC 9V jack. Using an adapter that does not meet these specifications could damage the scanner or the adapter.

•Always connect the DC adapter to the scanner before you connect it to the power source. When you finish, disconnect the adapter from the power source before you disconnect it from the scanner.

Follow these steps to connect the adapter.

1.Connect the Adaptaplug to the adapter’s cord with the tip set to negative.

2.Plug the adapter’s barrel plug into the scanner’s

PWR DC 9V jack.

15

Image 15

Contents PRO-92 500-Channel Portable Trunking Scanner Features Your scanner includes these special features Fm Page 4 Friday, September 17, 1999 1246 PM FCC Notice Pager transmissions Scrambled or encrypted transmissions Scanning LegallyContents Special Features Troubleshooting Power Sources Using BatteriesPreparation Fm Page 11 Friday, September 17, 1999 1246 PM Fm Page 12 Friday, September 17, 1999 1246 PM Charging Rechargeable Batteries Using AC Power PWR DC 9V jack Using Vehicle PowerConnecting the Antenna Connecting an Optional Antenna Connecting AN EARPHONE/ HeadphonesConnecting AN Extension Speaker Traffic SafetyListening Safely Connecting the Clone Cable Using the Belt ClipLook AT the Keypad About Your ScannerFm Page 21 Friday, September 17, 1999 1246 PM Fm Page 22 Friday, September 17, 1999 1246 PM Look AT the Display Motorola Low Freq Hi Freq Step Description MHz KHz Understanding BanksChannel Storage Banks Search BanksGMRS/FRS Fm Page 27 Friday, September 17, 1999 1246 PM Understanding Your PRO-92’S Modes Coded Squelch Modes PL, DPL, and Trunking AM ModeFM Mode PL ModeDPL Mode Ahhuuu LTR E. F. Johnson ModeMotorola Mode Edacs Mode Fm Page 34 Friday, September 17, 1999 1246 PM Operation Turning on the Scanner and Setting SquelchBank Channel Manual Storing Known Frequencies Into ChannelsAssigning a Text Tag to a Channel Storing Text TagsAssigning a Text Tag to a Bank Press Text Input ChartPress To Enter a Character from this Group Finding and Storing Active FrequenciesSearching a Preprogrammed Frequency Range Search Bank Search Range MHz DescriptionCurrent Search Bank Storing a Frequency While Searching for a Specified Channel Manually Changing a Search Range Turning Channel-Storage Banks Off and On Scanning the ChannelsManually Tuning a Frequency Deleting Frequencies from Channels Listening to the Weather BandListening to a Weather Channel Weather Alert Feature Locking Out Channels Special FeaturesUsing the Delay Function Locking OUT Channels or FrequenciesLocking Out Frequencies Reviewing the Lock-Out ChannelsLocked-out Reviewing Locked-Out FrequenciesClearing a Locked-Out Frequency Clearing All Lock Out Frequencies in a Search BankPriority Fm Page 52 Friday, September 17, 1999 1246 PM Display Description Changing the Receive ModeUsing the Attenuator Changing the Frequency StepRange MHz Search Step kHz Using the Display Backlight Using the KeylockTurning the KEY Tone on and OFF Cloning the Programmed Data from Scanner to Scanner Changing the Display ContrastUnderstanding Trunking Trunking OperationProgramming Fleet Maps Programming Trunking FrequenciesSize Code Press 8 and the display below appearsStoring Talk Group ID’s Talk Group ID’STalk Group ID Hold Locking Out Talk Groups ID Reviewing Locked-Out Talk Group ID’sClearing Talk Group ID’s Closed Mode Open and Closed ModesClearing All Talk Group ID’s in One Bank Mode Open Closed Changing the Open/Closed ModeHam Radio Frequencies General Guide to ScanningGuide to Frequencies US Weather FrequenciesThis scanner’s birdie frequencies in MHz are Guide to the Action Bands Typical Band UsagePrimary Usage Band Allocation Abbreviations ServicesAircraft Band- 108-137 MHz Meter Amateur BandVHF Low Band- 29-50 MHz -in 5 kHz steps Meter Amateur Band -50-54 MHzVHF High Band 148-174 MHz Low Band 450-470 MHz Public Safety Band Locally AssignedGovernment Band 406-420 MHz Cm Amateur Band 420-450 MHzFrequency Conversion Private Trunked BandGeneral Trunked Band Problem Possible Cause Remedy TroubleshootingFm Page 74 Friday, September 17, 1999 1246 PM Initializing the Scanner RESETTING/INITIALIZING the ScannerResetting the Scanner ResetFm Page 76 Friday, September 17, 1999 1246 PM Care and Maintenance UHF T Specifications9V DC RadioShack

Related manuals

Manual 2 pages 49.89 Kb

Manual 72 pages 29.87 Kb