Locking Out Talk Groups ID
Note: You can only lock out talk group ID’s when the scanner is in the closed mode (see “Open and Closed Modes” on Page 63).
To lock out a talk group ID, follow these steps:
1.Press PGM.
2.Press TRUNK.
3.Press FUNC, 
or 
to move the desired bank.
4.Press 
or 
to select the ID memory.
5.Press L/OUT to lock out the ID. L appears on the dis- play.
6.To remove the lock out from trunking ID, manually select the ID memory, and press L/OUT until L disap- pears from the display.
Reviewing Locked-Out Talk Group ID’s
To review the talk group ID you locked out within a bank, follow these steps:
1.Press PGM then press TRUNK.
2.Press FUNC then press L/OUT. The locked out ID appears on the display. If the ID memory bank has no locked out ID, you hear the low beep tone.
3.Press FUNC then press 
or 
to select a search
bank. Or, just press 
or 
to search for any lockout ID’s in a bank.
Clearing Talk Group ID’s
1.Press PGM, then press TRUNK.
2.Press FUNC, 
or 
to select ID memory.
3.Press FUNC then press CL.
62