Radio Shack PRO-2053 owner manual Assigning a Text Tag to a Group, Assigning a Text Tag to a Bank

Assigning a Text Tag to a Group

ID

1.Press PROG.

2.Press TRUNK.

3.Press FUNC then 8 or 9 to select the desired bank.

4.Press TRUNK to select the desired sub- bank.

5.Press or hold down 8 or 9 to select the desired group ID.

6.Press TEXT then enter the tag using the keypad. (See “Text Input Chart”.)

7. Press ENTER to store.

Assigning a Text Tag to a Bank

1.Select a channel within the desired bank by pressing MAN and entering the bank number (000 for bank 0 or 200 for bank 2, for example). Press MAN again.

2.Press PROG.

3.Press FUNC then 7. The cursor appears at the third line of the display. Enter the text using the keypad. (See “Text Input Chart”.)

4.Press ENTER to store.

Text Input Chart

Notes:

•To access the numbers, after you press TEXT (when you assign the text tag to a channel) or you press FUNC and 7 (when you assign the text tag to a bank), press 1. Then press the desired number you want to enter.

•To enter a lowercase character or a character from the second set for key 0, press FUNC after pressing the first numeral key.

BUTTONS PRESSED	CHARACTERS ENTERED	BUTTONS PRESSED	CHARACTERS ENTERED
1	0 1 2 3 4 5 6 7 8 9	2	A B C
2 then FUNC	a b c	3	D E F
3 then FUNC	d e f	4	G H I
4 then FUNC	g h i	5	J K L
5 then FUNC	j k l	6	M N O
6 then FUNC	m n o	7	P Q R S
7 then FUNC	p q r s	8	T U V
8 then FUNC	tuv	9	W X Y Z
9 then FUNC	w x y z	0	. - # _ @ + * & / ,
0 then FUNC	$ % ! ^ ( ) ? -> ` <-	./DELAY	Space

Operation 17