Radio Shack PRO-2053 owner manual Understanding Banks, Understanding Your Scanners Modes

Page 12

Manual Tuning — allows you to manually scan through the entire range of available frequencies without programming. (See “Specifications” on Page 52 for a list of the available frequency ranges.)

Weather Radio — allows you to listen to NOAA weather broadcasts without program- ming. See “Listening to the Weather Band” on Page 23.

UNDERSTANDING BANKS

Channel Storage Banks

A bank is a storage area for a group of chan- nels. Channels are storage areas for fre- quencies. Whereas a channel can only contain one frequency, a bank can hold nu- merous channels.

To make it easier to identify and select the channels you want to listen to, your scanner divides the channels into 10 banks (ò to é) of 30 (òò to ðé) channels each, a total of 300 channels. You can use each channel-stor- age bank to group frequencies, such as those used by Motorola trunking, EDACS trunking, Marine, CB, Police, Fire, Aircraft and Ham (see “Typical Band Usage” on Page 40).

For example, a police department might use four frequencies, one for each side of town. You could program the police frequencies starting with òòò (the first channel in bank 0) and program the fire department frequencies starting with ñòò (the first channel in bank 1). The first digit identifies the bank (ò to é). The second and third digits identify the channel within the bank (òò to ðé).

Search Banks

Your scanner has five preprogrammed search banks and one limit search bank. You can set the lower and higher frequency limit in the limit search bank. (For the default set-

ting, see “Searching a Preprogrammed Fre- quency Range” on Page 18).

UNDERSTANDING YOUR SCANNER'S MODES

You can program each channel with any of four receive modes (AM, FM, MOT, and ED). However, you can not program MOT (Motor- ola), or ED (EDACS) mode in VHF. Each re- ceive mode affects how your scanner operates when scanning and receiving trans- missions, and also affects what transmis- sions you receive when you set the scanner to the closed mode. See “Changing the Re- ceive Mode” on Page 28.

AM Mode

The AM mode sets the scanner to receive transmissions using amplitude modulation (AM), primarily used for CB, aircraft, military, some amateur radio, and some government transmissions. (Refer to “Specifications” on Page 52 for a list of the frequencies cov- ered.) When the scanner receives a trans- mission on a channel set to the AM mode, it always stops on the transmission.

FM Mode

The FM mode sets the scanner to receive transmissions using frequency modulation (FM), used for most public safety transmis- sions, as well as broadcast, business, and amateur radio transmissions. When the scanner receives a transmission on a chan- nel set to the FM mode, it always stops on the transmission.

Motorola Mode

You can set your scanner so it decodes the talk group IDs used with Motorola trunking systems. This setting is called the Motorola mode.

12

About Your Scanner

Image 12
Contents PRO-2053 Channel Desktop Trunk-Tracking Scanner FCC Wants You to Know Contents Special Features Trunking OperationGeneral Guide to Frequencies Troubleshooting SpecificationsSimultaneous Trunking Operation Character, 4-Line, Alphanumeric DisTriple Conversion Superheterodyne Re Scanning Legally Telescoping Antenna provides excellentPower Sources Using AC PowerUsing Vehicle Battery Power PreparationConnecting the Antenna Connecting AN EARPHONE/ HeadphonesConnecting an Outdoor Antenna Listening SafelyTraffic Safety About Your ScannerLook AT the Keypad Quick Start Understanding Banks Understanding Your Scanners ModesEdacs Mode Turning on the Scanner and Setting Squelch OperationOpen and Closed Modes Storing Known Frequencies Into Channels Storing Trunking Frequencies Into Channels Storing Text TagsAssigning a Text Tag to a Channel Text Input Chart Assigning a Text Tag to a GroupAssigning a Text Tag to a Bank Finding and Storing Active Frequencies Searching a Preprogrammed Fre- quency RangeBank Band Search bank SR0 Marine band Receive mode FM Search bank SR1 CB band Receive mode AM Search bank SR2 Police/Fire band Receive Mode FM GroupSearch bank SR3 Aircraft Receive mode AM Search bank SR4 Ham band Receive mode FMManually Tuning a Frequency Listening to the Weather BandSpecial Notes Using Frequency Copy Function Listening to a Weather ChannelDisplaying Weather Messages WX Alert and Beep Tone Confir- mationScanning the Channels Copying a Frequency into the Pri- ority ChannelTurning Channel-Storage Banks Off and On Special Features Using the Delay FunctionLocking OUT Channels or Frequencies Priority Reviewing Locked-Out Frequen- ciesClearing a Locked-Out Frequency Clearing All Locked-Out Frequen- cies in a Search BankChanging the Receive Mode Using the Attenuator Turning the KEY Tone on and OFFChanging the Display Contrast Cloning Programmed DataTrunking Operation Setting Squelch for the Trunking Mode Understanding TrunkingProgramming Trunking Frequencies Programming Motorola Trunking Systems UHF-Lo DF appearsProgramming Motorola Trunking System 800 MHz Programming Fleet MapsSize Code Talk Group IDs Storing Talk Group IDs8Wdaý&# ?ýDe$ý CEJ0ýdedTalk Group ID Hold Turning Sub-Banks On or OffDelay Function in ID Indication Mode Locking Out Talk Group IDsReviewing Locked-Out Talk Group IDs Clearing Talk Group IDsChanging the Open/Closed Mode General Guide to FrequenciesOpen and Closed Modes US Weather Frequencies in MHzHam Radio Frequencies Birdie FrequenciesGuide to the Action Bands Typical Band UsageHF Band VHF BandPrimary Usage UHF BandAbbreviationsServices Band AllocationHigh Frequency HF Meter Amateur Band-50-54 MHz in 5 kHz steps VHF High Band 148-174 MHz in 5, 6.25 or 7.5 kHz steps New Mobile Narrow Band 220-222 MHz in 5 kHz steps Ultra High Frequency UHF Conventional Systems Band Locally Assigned in 6.25 kHz steps Frequency Conversion Troubleshooting RESETTING/INITIALIZING the ScannerResetting the Scanner Initializing the ScannerCare Specifications Sensitivity 20 dB S/NSpecifications Page Page Limited One-Year Warranty