Advantech PPC-V106 user manual Standard PC functions

Standard PC functions

•CPU: Embedded VIA Eden 800 MHz CPU

•BIOS: Award 256 KB Flash BIOS, supports Plug & Play, APM

•System Chipset: VIA CLE266 and VT8235 CD

•Front side bus: 133 MHz

•System Memory: Two 184-pin DIMM sockets, accepts up to 2 GB DDR 266 SDRAM

•PCI bus master IDE interface: Supports two connectors. Each con- nector has one channel and supports two IDE devices. Each channel supports PIO modes 0 ~ 4, DMA mode 0 ~ 2, and Ultra DMA 33/66/ 100 simultaneously. The secondary connector is designated for the CD- ROM drive or CompactFlash card. BIOS supports IDE CDROM boot- up

•Keyboard/mouse connector: Supports 1 standard AT Keyboard and a PS/2 Mouse

•Serial ports: Three serial ports with two RS-232 ports (COM 1, COM 3), and one RS-232/422/485 port (COM2). All ports are compatible with 16C550. UARTs, +5V/+12V power supply selectable

•Universal serial bus (USB) port: Supports up to two V2.0 USB ports, Intel UHCI v1.1 compatible

•Mini PCI bus expansion slot: Accepts one type lll mini PCI bus card

•Solid State Disk: Supports one 50-pin socket for CompactFlash type I/ II (True IDE mode) or IBM MicroDrive HDD

•Watchdog timer: 63-level timer intervals automatically generates sys- tem reset or IRQ11 when the system stops due to a program error or EMI. Jumperless selection and software enabled/disabled

•Battery: 3.0 V @ 195 mA lithium battery

•Power management: Supports power saving modes including Normal/ Standby/Suspend modes. APM 1.2 compliant

VGA/Flat panel interface

•Chipset: Integrated in VIA CLE266

•Frame Buffer: Supports 8 / 16 / 32 / 64MB frame buffer using system memory

•Display type: Simultaneously supports CRT and flat panel displays (EL, LCD and gas plasma)

3 Chapter1