9.3 Driver Installation for Windows 2000
1.Install Service Pack 3 or above before running the setup program.
2.Open the Device Manager and check if there is a “Universal Serial Bus (USB) Controller” under “Other devices”.
3.Execute the setup program by double click on the “SETUP.exe” file in
4.The screen shows the VIA Software License Agreement. Please read it FIRST and press “Yes” if wish to further proceed with the driver installation.
5.Press “Next”.
6.Select “Install USB Driver” and press “Next”.
7.The screen shows the Microsoft Software License Agreement. Please read it FIRST and press “Yes” if wish to further proceed with the driver installation.
8.Press “OK”.
9.Press “Print to File”.
10.Press “OK”.
11.Press “Finish” and the Microsoft EHCI drivers for Windows 2000 are now installed successfully.
Note: For driver uninstallation, you can remove the “Microsoft USB 2.0 Host Controller Driver” by selecting the “Uninstall” button. This will completely remove the driver from the system.
43 | Chapter9 |