Advantech PPC-V106 user manual Audio function

Page 16

Audio function

Chipset: Integrated in VT8235CD South Bridge

Audio controller: AC97 Ver. 2.0 compliant interface, Multi stream Direct sound and Direct Sound 3D acceleration

Stereo sound: 18-bit full-duplex codec

Audio interface: Line out

PCI bus Ethernet interface

Chipset: Realtek RTL8100C PCI local bus Ethernet controller

Ethernet interface: Full compliance with IEEE 802.3u 100Base-T and 10 Base-T specifications. Includes software drivers and boot ROM.(Support both RPL and PXE).

100/10Base-T auto-sensing capability

PCMCIA interface

Chipset: R5C554

Cardbus Controller: A PC card controller offers a single chip solution as a bridge between the PCI bus and the Cardbus

PCI bus interface: Complies with PCI Local Bus Specification 2.1, and supports the 32-bit Cardbus (Card-32) and the 16-bit PC card (Card-16) without external buffers

Hot insertion and removal

Touchscreen (Optional)

Type

Analog Resistive

Infrared

 

 

 

Light Transmission

75%

91%

 

 

 

Controller

RS-232 interface

RS-232 interface

 

(uses COM4)

(Use COM4)

 

 

 

Power Consumption

<5 V@ 100 mA

+5 V @ 150 mA

 

 

 

Durability

above 10 million

100,000 hrs

 

 

 

Software Driver

Supports Win-

Supports Win-

 

dows 98/2000/ME/

dows and DOS

 

XP

 

 

 

 

PPC-V106 User Manual

4

Image 16
Contents User’s Manual Fanless Vehicle Mounted Terminal with 10.4 TFT LCDCopyright FCC Class B Packing List Additional Information and Assistance Contact informationSafety Instructions Wichtige Sicherheishinweise Viii Contents Chapter VIA Chipset Appendix a Programming the Watchdog Timer Xii General Information General Specifications IntroductionStandard PC functions Audio function LCD Specifications Backlight lifetime 20,000 hoursDimensions System Setup Quick Tour of the Panel PC Front View of the Panel PCRear Side View of the Panel PC Installation Procedures Connecting the Power CordConnecting the Keyboard or Mouse Switching On the PowerRunning the Bios Setup Program Installing System Software Prior to shipment of your panel PCInstalling the Drivers InstallPage Hardware and Peripheral Installation Overview of Hardware Installation and Upgrading Installing the 2.5 Hard Disk Drive HDDPlacing the Rubber Seal Placing the Rubber SealInstalling the Universal Arm Universal ArmJumper Settings and Connectors Setting Jumpers Jumpers and Switches Locating Jumpers and SwitchesConnectors Panel PC connectorsCPU Installation Locating ConnectorsCmos Clear for External RTC JP1 1 COM2 RS-232/422/485 Setting JP5COM-port Interface Serial port default settings 2 COM1/COM2/COM3/ Pin 9 Output Setting JP4 COM1/2/3 Pin 9 Output SettingJP4JP3 Setting LCD Panel Power Setting VGA InterfaceVIA Chipset Installation 4-in-1 Driver for Windows 98/2000/XP Further InformationAGP Svga Setup Chipset Installation of Svga DriverDisplay memory Installation for Windows 98/ME Installation for Windows 2000/XPPage PCI Bus Ethernet Interface Installation of Ethernet Driver Installation for Windows 98/ME Further Information Audio Installation of Audio Driver USB Installation of USB 2.0 Driver Driver Installation for Windows XPDriver Installation for Windows Driver Installation for Windows ME / 98 / 98SE Touchscreen General specifications General informationInstallation of Touchscreen Drivers Environmental SpecificationsInstallation of Resistive T/S driver for Windows 98/ME Installation of Resistive T/S driver for Windows 2000/XP Installation of Infrared T/S driver for Windows 2000/XPPage Programming the Watchdog Timer Appendix a Programming the Watchdog Timer Programming the Watchdog TimerMOV DX,2EH MOV DX,2EH MOV AL,AAH Pin Assignments Internal Speaker Connector CN14 Inverter Power Connector CN10Appendix B Pin Assignments Floppy Drive Connector CN16 Reserved Table B.3 Floppy drive connector CN16IDE Hard Disk Drive Connector CN15 IR Connector CN8 Reserved Lvds Connector CN4Flat Panel Display Connector CN2 Reserved COM1 COM211 COM3 Connector CN 10 COM3COM 4 Connector CN USB PortParallel Port Connector CN11 VGA Connector