Chapter 4 | BIOS Setup |
♦Assign DMA 3 – [Disabled] or [Enabled]
•If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and Play adapter.
•If another device in the system is using this DMA channel, then this field should be set to [Disabled].
♦Assign DMA 5 – [Disabled] or [Enabled]
•If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and Play adapter.
•If another device in the system is using this DMA channel, then this field should be set to [Disabled].
♦Assign DMA 6 – [Disabled] or [Enabled]
•If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and Play adapter.
•If another device in the system is using this DMA channel, then this field should be set to [Disabled].
♦Assign DMA 7 – [Disabled] or [Enabled]
•If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and Play adapter.
•If another device in the system is using this DMA channel, then this field should be set to [Disabled].
78 | Reference Manual | LittleBoard 550 |