Cino FM400 manual UPC-A & UPC-E Setting , Supplement Scan Voting

Mount	Manual
FuzzyScanFixed	Programming
	Scan

Symbology Reading Control

♦ UPC-A & UPC-E Setting , Supplement Scan Voting♦

PROGRAM							F_DEFAULT
Family Code Selection	P.C		Parameter Selection			Option Code
UPC Supplement Setting	SS	Select UPC without supplement digits ￿					0
	SS	Select UPC with only 2 supplement digits					1
	SS	Select UPC with only 5 supplement digits					2
	SS	Select UPC with 2/5 supplement digits					3
	SS	Disable force supplement digits output ￿					4
	SS	Enable force supplement digits output					5
	SS	UPC Family Addenda Separator Off ￿					6
	SS	UPC Family Addenda Separator On					7
UPC/EAN Security Level	SS	Level 0					0
		Level 1 ￿
	SS						1
	SS	Level 2					2
		Only available for UPC-A & EAN-13
Supplement Scan Voting	SS	None		Level 7	0			7
	SS	Level 1		Level 8	1			8
	SS	Level 2		Level 9	2			9
	SS	Level 3 ￿		Level 10	3			A
	SS	Level 4		Level 11	4			B
	SS	Level 5		Level 12	5			C
	SS	Level 6		Level 13	6			D

￿ UPC/EAN Security Level

The scanner offers three levels of decode security for UPC/EAN bar codes:

Level 0: If you are experiencing misread of poorly-printed or out-of-spec. bar codes, especially in characters 1, 2, 7, and 8 in level 1, please select level 0. Selection of this security level may significantly impair the decoding ability of the scanner.

Level 1: This is the default setting which allows the scanner to operate fastest, while providing sufficient security in decoding “in-spec” UPC/EAN bar codes.

Level 2: If you are experiencing misread of poorly-printed, soiled or damage bar codes in level 1, please select level 2. This is the most aggressive setting and may increase the misread.

￿The Supplement Scan Voting is the number of times the same UPC/EAN with 2/5 supplement digits has to be decoded before it is transmitted. It is helpful when decoding a mix of UPC/EAN symbols with and without supplement digits. This function is effective when you select UPC/EAN with only 2 supplement digits, UPC/EAN with only 5 supplement digits or UPC/EAN with 2/5 supplement digits. The default value is Level 3. When you select higher level, it may impact the reading speed on poorly-printed, low contrast or damage barcode labels.

20