Cino FM400 manual Delay Setting

Mount	Manual
FuzzyScanFixed	Programming
	Scan

Serial Interface Control

♦ Delay Setting ♦

PROGRAM			F_DEFAULT
Family Code Selection	P.C	Parameter Selection	Option Code
Intermessage Delay	SS	None ￿	FIN
	MS	1-99 (x5) msec.	(2 digits)
		Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
		this selection automatically.
Intercharacter Delay	SS	None ￿	FIN
	MS	1-99 (x5) msec.	(2 digits)
		Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
		this selection automatically.
Interfunction Delay	SS	None ￿	FIN
	MS	1-99 (x5) msec.	(2 digits)
		Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
		this selection automatically.

￿Intermessage Delay is a time delay between messages output by FuzzyScan. Increasing this delay will help host applications process the incoming data on time.

￿Intercharacter Delay is a time delay between data characters output by FuzzyScan. These two parameters are used to synchronize data communication when : 1) the data transmission speed is too fast, characters may be skipped; 2) multitasking operation system or host computers in a network may slow down the keyboard handling; 3) various notebook or desktop PC systems require different timing parameter settings. Please always add one extra unit as safety margin when adjusting these two parameters.

￿Interfunction Delay is a time delay between the transmission of each segment of the message string.

38