Premier Mounts EST150 installation instructions Single Mounting Point Installation

EST150

Step 6

1)Tighten the mounting screws which secures the mounting legs to the projector.

Do not overtighten the mounting screws.

Step 7

1) Insert one (1) Barrel Cap (except for the security barrel) into the end of each leveling barrel.

Go to the “Attaching the Mount Carriage to the

Projector Arm” section on page 15.

Single Mounting Point Installation

A single ¼-20 x 5/16″ screw must be used to attach the mount carriage to the projector if your projector has only one mounting point.

Do not overtighten the ¼-20 x 5/16″ screw.

Proceed to the “Attaching the Mount Carriage to the

Projector Arm” section on page 15.

Page 12 Visit the Premier Mounts website at http://www.premiermounts.com Installation Instructions