Premier Mounts EST150 Attaching the Mount Carriage to the Projector Arm Step

Page 13

EST150

Attaching the Mount Carriage to the Projector Arm

Step 1

Insert and slide the mount carriage along the projector arm to the desired position.

Shown with optional EST-WP dual stud plate

Projector not shown

Step 2

Once you have the desired position, use

one (1) M5 x 10mm security screw to tighten the mount carriage in place.

M5 x 10mm

Security Screw

Proceed to the “Cable Routing (Optional)” section on page 16.

Installation Instructions

Visit the Premier Mounts website at http://www.premiermounts.com

Page 13

Image 13
Contents Installation Instructions Weight Capacity Table of ContentsParts List Installation ToolsEST-WP Optional FeaturesProceed to the Wood Stud Installation section Determining the Installation HeightEST150 Installation Step Wood Stud InstallationGo to the Throw Distance Calculation section on Throw Distance Calculation Proceed to the Projector Installation sectionProceed to the Attaching the Mount Carriage section Attaching the Mount Carriage Selecting the Mounting Hardware Multiple Mounting Point Installation Step Mounting Hardware Too Long? Go to the Attaching the Mount Carriage to Single Mounting Point InstallationProceed to the Attaching the Mount Carriage to Attaching the Mount Carriage to the Projector Arm Step Securing the Projector Optional Cable Routing OptionalProceed to the Securing the Projector Optional section Technical Specifications Mount AdjustmentDisclaimer Warranty