Premier Mounts EST150 installation instructions Features, EST-WP Optional

Page 4

EST150

Features

The Single-Stud Short-Throw Projector Wall Mount (EST150) is a simple and elegant tool for mounting a wide variety of short-throw projectors. Its design allows you to use the same mount even if you need to replace the projector with a different model. Unique features include a mount carriage that easily slides along the projector arm for quick screen size adjustments, integrated cable management, and Lock-It™ security screws and barrel for enhanced security.

Single Stud Mounts firmly to a single wood stud.

Projector Adjustment

Position the projector anywhere along the projector arm.

Cable Routing Discreetly manage signal and power cables through the projector arm.

Radial Glide®

Up to 6°of smooth adjustment in any direction.

EST-WP (Optional)

The optional EST-WP wall plate allows for mounting to 12” or 16” dual studs. The back plate also allows lateral shift after installation.

Page 4

Visit the Premier Mounts website at http://www.premiermounts.com

Installation Instructions

Image 4
Contents Installation Instructions Table of Contents Weight CapacityInstallation Tools Parts ListFeatures EST-WP OptionalDetermining the Installation Height Proceed to the Wood Stud Installation sectionWood Stud Installation EST150 Installation StepGo to the Throw Distance Calculation section on Throw Distance Calculation Proceed to the Projector Installation sectionProceed to the Attaching the Mount Carriage section Attaching the Mount Carriage Selecting the Mounting Hardware Multiple Mounting Point Installation Step Mounting Hardware Too Long? Go to the Attaching the Mount Carriage to Single Mounting Point InstallationProceed to the Attaching the Mount Carriage to Attaching the Mount Carriage to the Projector Arm Step Securing the Projector Optional Cable Routing OptionalProceed to the Securing the Projector Optional section Mount Adjustment Technical SpecificationsWarranty Disclaimer