Display operation
4.Rotate the control wheel to select User Controls.
5.Press the control wheel to switch from “On” to “Off”.
6.Exit the menus.
To enable user controls:
1.Make sure the
2.Do not use the control wheel for at least 3 seconds.
3.Rotate the control wheel 1 step clockwise.
4.Press the control wheel 2 times.
5.Rotate the control wheel 1 step counterclockwise. The
Note: Steps 2 to 4 must be performed in maximum 3 seconds.
6.Rotate the control wheel to select Settings.
7.Press the control wheel to enter the Settings menu.
SETTINGS |
|
DPMS | On |
Power LED | On |
User Controls | Off |
EXIT |
|
|
|
Figure 27: Settings menu
8.Rotate the control wheel to select User Controls.
9.Press the control wheel to switch from “Off” to “On”.
10.Exit the menus.
76