Altec Lansing FX6021 manual Headphones, System Specifications, Wall Mounting

Page 5

TREBLE

HEADPHONES

 

 

Press the treble button on the hardwired controller or wireless remote. A blue EQ LED will illuminate next to the treble button. When using the hardwired controller, turn the master volume knob clockwise to increase the treble and counter-clockwise to decrease the treble.

When using the remote, press and hold “+” button to increase the treble or press and hold the “–” button to decrease the treble.

An LED will light up and move on the wired controller to indicate changing treble levels. The LED will reside in the far right position for maximum treble and in the far left position for minimum treble.

After a few seconds, treble will default back to main volume. To return to treble control, press the treble button again.

STAND-BY

To mute the FX6021 press the stand-by button on the hardwired controller or wireless remote. The blue LED located next to the power button will turn off. To un-mute, press the stand-by button again.

It is important to note that while in stand-by mode the system continues to receive power. To completely shut down the FX6021, press the standby button on the hardwired controller or wireless remote and then unplug the unit from the wall.

SYSTEM SPECIFICATIONS

To use headphones with the system, plug them into the labeled jack on the side of the wired controller. When headphones are connected, both satellites and the subwoofer are muted.

WALL MOUNTING

Remove the satellite base from the satellite. The satellite can be mounted to the wall using the key holes (top and bottom), or by using the threaded inserts on the rear of the satellite (threaded inserts require the purchase of a universal mounting kit.)

Sound Pressure Level (SPL):

105 dB

 

SUBWOOFER

 

 

Total Continuous Power:

75 Watts RMS

 

Driver:

One 6.5" long-throw woofer

 

 

 

 

 

 

Front Speakers:

12.5 Watts/channel @ 4 ohms @ 10% THD

 

 

 

 

 

@ 180 – 15000 Hz 2 Channels Loaded

 

POWER REQUIREMENTS

 

Subwoofer:

50 Watts @ 4 ohms @ 10% THD

 

 

 

 

 

USA, Canada and applicable

 

 

@ 40 – 180 Hz Single Channel Loaded

 

 

 

 

Latin American countries:

120 V AC @ 60 Hz

 

 

 

System Response:

32 Hz – 18 kHz (-10dB)

 

 

 

 

 

 

 

 

 

 

Signal to Noise Ratio

 

 

Europe, United Kingdom,

 

@ 1 kHz input:

> 75 dB

 

 

 

applicable Asian countries,

 

 

 

 

 

Driver (per Satellite):

Six 1" full-range micro drivers

 

Argentina, Chile and Uruguay:

230 V AC @ 50 Hz

 

 

 

 

 

 

ETL/cETL/CE/NOM Approved

TROUBLESHOOTING

SYMPTOM

POSSIBLE PROBLEM

SOLUTION

Can’ t insert

Some of the pins are bent.

Try to gently straighten the pins with tweezers or very small pliers. If this does

the wired

 

not work, contact the Altec Lansing Consumer Support Department for further

controller’s DIN

 

instructions.

connector into

 

 

the subwoofer.

 

 

 

 

 

No LEDs are lit.

Power isn’ t turned on.

Press the Power button on the wired controller or remote control.

 

 

 

 

Power adapter isn’ t connected to the wall outlet

Disconnect and then reconnect the power adapter to both the wall outlet and

 

and subwoofer.

the subwoofer.

 

 

 

 

Surge protector (if used) isn’ t powered on.

If the power adapter is plugged into a surge protector, make sure the surge

 

 

protector is switched on.

 

 

 

 

Wired controller isn’ t connected to the subwoofer.

Connect the wired controller to the subwoofer.

 

 

 

 

Wall outlet not functioning.

Plug another device into the same jack on the wall outlet to ensure the outlet

 

 

is working.

 

 

 

Controller

DIN connector not inserted in subwoofer jack.

Verify that the grey-colored DIN connector is firmly inserted into the DIN

doesn’ t work.

 

connector jack on the subwoofer. Ensure the pins are aligned between the

 

 

plug and jack. Remember, the arrow should be facing up.

 

 

 

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents FX6021 Page TWO-YEAR Limited Warranty Important Safety InstructionsConnecting the Power Cord AC Wall Socket Powering on BOX ContentsUsing the Remote Control & Wired Controller Placing SpeakersSystem Specifications HeadphonesTroubleshooting Symptom Possible Problem Solution Wall MountingSymptom Possible Problem Solution Avertissement Consignes DE Sécurité ImportantesConnexion DU Câble D’ALIMENTATION Prise Murale CA Garantie Limitée À Deux ANSContenu DE L’EMBALLAGE Installation DES EnceintesBranchements Mise Sous TensionFixation AU MUR Conseils DE Dépannage Symptôme Problème Possible SolutionCasque D’ÉCOUTE Symptôme Problème Possible Solution Avvertenza Istruzioni Importanti Sulla Sicurezza AttenzioneCollegamento DEL Cavo D’ALIMENTAZIONE Presa a Muro CA Garanzia Limitata DI DUE AnniPosizionamento Degli Altoparlanti Contenuto Della ScatolaCablaggio AccensioneCuffie Treble GLI AltiMontaggio a Muro Specifiche DEL SistemaSymptom Possible Problem Solution Warnung Wichtige Sicherheitshinweise AchtungAnschluss DES Netzsteckers WECHSELSTROM-STECKDOSE Zweijährige GarantieAufstellen DER Lautsprecher LieferumfangHerstellen DER Verbindungen EinschaltenKopfhörer Fehlersuche Symptom Mögliches Problem LösungWandmontage SystemspezifikationenSymptom Mögliches Problem Lösung Garantía Limitada DE DOS Años Instrucciones DE Seguridad Importantes PrecauciónAdvertencia Cómo Ubicar LOS Altavoces Contenido DE LA CajaCómo Hacer LAS Conexiones EncendidoFicha Técnica AuricularesMontaje EN LA Pared Symptom Possible Problem Solution Advertência Instruções Importantes Quanto À Segurança CuidadoConectando O FIO DE Potência Soquete DE Parede CA Garantia Limitada DE Dois AnosColocando OS Altifalantes Conteúdo DA CaixaFazendo AS Conexões LigandoAudiofones Diagnóstico DE Falhas Sintoma Possível Problema SoluçãoMontagem EM Parede Especificações do SistemaSintoma Possível Problema Solução Peringatan Penting Petunjuk Keselamatan AwasMenghubungkan Kabel Listrik Stopkontak AC DI Dinding Jaminan Terbatas DUA-TAHUNMenempatkan Pengeras Suara ISI KemasanMembuat Sambungan MenyalakanDudukan Dinding HeadphoneSpesifikasi Sistem Menyelesaikan Masalah Gejala Kemungkinan Masalah SolusiGejala Kemungkinan Masalah Solusi Page Page Page Page Page Page Page Page Page Page Page Page Page 852 2735-7331 Fax 852

FX6021 specifications

The Altec Lansing FX6021 is a powerful multimedia speaker system designed to deliver a rich and immersive audio experience. With its sleek and modern design, this compact speaker system is not only visually appealing but also engineered for performance. Featuring a 2.1 channel configuration, the FX6021 includes two satellite speakers and a dedicated subwoofer, providing a dynamic range of sound suitable for both music and gaming.

One of the standout characteristics of the FX6021 is its robust subwoofer, which features a 6.5-inch driver. This powerful component allows the speaker system to produce deep, resonant bass, enhancing audio depth for movies, games, and music alike. The satellite speakers are equipped with high-performance drivers that ensure clear mid-range and high-frequency response, creating a well-balanced sound stage.

The system incorporates advanced technologies to optimize audio output. Altec Lansing has utilized computer-optimized technology to minimize distortion, ensuring that users enjoy clean and clear sound without compromising on volume. The speakers are also designed to handle a wide frequency range, allowing for a more versatile audio experience, whether listening to classical music or the latest pop hits.

In terms of connectivity, the FX6021 is incredibly user-friendly. It comes with a built-in auxiliary input, enabling users to easily connect their devices such as smartphones, tablets, and computers. The satellite speakers are also equipped with volume control knobs, providing an intuitive way to adjust sound levels on the fly.

Furthermore, the design of the FX6021 emphasizes both functionality and aesthetics. The rounded edges and minimalistic appearance make it a stylish addition to any home or office setup. The compact size of the speakers ensures that they can fit seamlessly in small spaces without sacrificing audio quality.

Overall, the Altec Lansing FX6021 is a feature-rich multimedia speaker system that achieves a perfect blend of style, performance, and versatility. It stands out for its impressive sound quality, solid bass response, and user-friendly design, making it an excellent choice for audiophiles, gamers, and casual listeners alike. Whether it’s for home entertainment or personal use, the FX6021 promises to elevate your audio experience.
Top Page Image Contents