Brother CM100DM Checking the Trial Cutting Results, With an Appropriate Blade Extension

■Checking the Trial Cutting Results

Adjust the blade extension according to the trial cutting results.

Repeatedly perform trial cutting and adjust the blade extension until the material is cut cleanly.

With an Appropriate Blade Extension

When the material is peeled off, a faint trace of the cut remains on the mat surface.

With a Blade Extension That Needs to be Adjusted

Trial cutting results	Tips for adjustment
Part of the cut	Too Little of a Blade Extension:
material remains	Turn the holder cap half a
when it is peeled off.	marking to the right. (b)
The material is not	Too Little of a Blade Extension:
	Turn the holder cap one marking
clearly cut.
	to the right. (b)
There are deep cuts	Too Much of a Blade Extension:
completely through	Turn the holder cap one marking
the mat.	to the left. (a)

ab

Note

•Be careful that the blade does not extend too much. If there is too much of a blade extension, the material may not be cut cleanly and the mat will deteriorate quicker.

22