Brother CM100DM operation manual Editing Pictures, Specifying Delete Size, Image editing screen

cEdit the cutting data as necessary, and then cut or draw.

For details on finishing cutting, follow the procedures under “Loading the Mat” (page 20) and “Cutting” (page 21).

XTouch to delete all of the selected spots.

Editing Pictures

By adjusting the output level of data for a scanned image, you can reproduce the image in a wide variety of ways.

Available in the following screen

Image editing screen

→Tutorial 4; Step a (page 50) in “Editing Cutting Data”

Memo

•Small spots and unwanted lines created during scanning can be deleted after a scanned image is converted to cutting data.

XAfter recalling the cutting data into the pattern layout screen, use the editing functions for selecting the spots to delete.

For details on the function, see “Selecting Multiple Patterns” on page 31.

b

a

aTouch for selecting multiple patterns in the specified area.

bUnwanted spots and lines

XSpecify the area of the unwanted spots, and then touch the “OK” key.

■Specifying “Delete Size”

Clean up the image by deleting small spots, unwanted lines or texts on it.

In the following example, we will scan three images of different sizes (4 mm, 40 mm, 100 mm).

aSelect one of the three detection options, and

then touch to display the function selection screen.

bTouch to display the setting screen.

52