Brother 515 manual Manual

Page 46

36

C H A P T E R F I V E

 

NGT (For FAX-515)––This is the Night Mode setting. The fax machine receives incoming fax calls without ringing. In case of a voice call, the fax machine does not ring and it doesn’t receive the voice call. The caller hears fax tones after few rings.

NGT (For FAX-525DT)––If you set the receiving mode to Night, DT MODE key is automatically turned on. The fax machine receives incoming fax calls without ringing. In the event of voice call, the incoming voice call is stored in the message manager memory. As the ICM recording monitor (for call screening) is automatically set to OFF, the user is not disturbed by the voice of the caller. In case of memory full, the machine change to F/T mode if the machine still has paper. It changes to Manual mode if both the memory becomes full and the fax machine runs out of paper.

If you have not recorded the Outgoing Message for Message Manager mode, your fax machine does not receive the voice call.

In both the FAX-515 and the FAX-525DT, Night mode overrides the receiving mode set by the user. In the morning, the user must press Mode key to manually revert to the Answer mode they have set (such as F/T or FAX ONLY).

If you pick up the handset or the power is off for some reason when the Night mode is on, the Answer mode will automatically revert to

MANUAL.

Current

Answer Mode

09/06 15:25 FAX

Set Mode Resolution

Caller ID

FAX-525DT

09/06 15:25 TAD

￿

FAX:￿FAX ONLY

F/T: FAX/TEL

TAD: EXTERNAL ANSWER MACH. (Only for FAX515)

MAN: MANUAL

NGT: NIGHT

TAD: MSG MGR (Only for FAX-525DT)

DT MODE

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Page Page Pan European Approvals Information Page Table of Contents To select or change your Answer Mode Iii Recording the Message Manager’s Outgoing Message 103 B L E O F C O N T E N T S Introduction UsingThis ManualFinding Information About Fax Machines Symbols Used In This ManualFax Tones and Handshake ECM Error Correction Mode For FAX-525DT Only FAX-515 Control Panel Overview Mute/Speed DialHelp DT Mode FAX-525DT Control Panel OverviewDT Mode A P T E R O N E Installation Packing ListChoosing a Location Assembly Load the recording PaperWhen you use 210mm recording paper roll size Connect the handset Connect the Power Cord Connect the Telephone LineAttach the document support Multi-Line Connections PABXsRinger Equivalence Number REN Using Extension Telephones Connections Connecting an External Telephone Answering Device TADOutgoing Message OGM of External TAD Sequence of External TAD Reception Connecting an External Telephone On-Screen Programming Function ModeUser-Friendly Programming Function Selection Table Alternating DisplaysFAX NO. & Start Copy Press Copy Setup Send Cancel JOB Setup TAD FAX-525DT Only A P T E R T H R E E Getting Started Setting the Dialling Mode Tone/PulseSetting the Date and Time Diallingtone DiallingpulseEnter Monthxx Setting the Station IDEnter Yearxx Enter DayxxEntering Text FAXInserting spaces Setting the Beeper VolumeSpecial characters and symbols Making correctionsPabx and Transfer Setting PabxSetting the Clock Change Pbxoff Select & SETSetting the Speaker Volume Setting the Ring VolumeMemory Storage A P T E R F O U R Select Answer Mode Setup ReceiveBasic Receiving Operations Manual FAX only FAX/TEL Manual Night FAX only FAX/TEL Tadanswer Mach Manual NightTadmsg MGR Setting the F/T Ring Time Setting the Ring DelayRing TIME30 SEC Fax Detect Advanced Receiving Operations Operation from an External or Extension TelephoneFor F/T Fax/Tel Mode Only Remote Call TransferACT.CODE*51 Changing Remote CodesRemote ACT.ON DEACT.CODE#51Set the Caller ID to on Caller ID Caller IDentificationAdvantages of Caller ID How Does Caller ID Work? Caller ID Appears on the Display When Your Telephone RingsCaller ID is Stored inYour Machine’s Memory Press Start KEY Selecting a Caller ID from the Memory for Call ReplyCaller ID LOG Dialpress StartTo Activate Certain Network Services When Using Call Reply Call Reply to DDI numbers via Caller IDPrinting the Caller ID List Clearing the Caller IDs Stored in Memory Only for FAX-525DTName BT Call Sign For U.K. Only Set the BT Call SignSecure Polling Setup for Polling ReceivePolling Pollingstandard Select & SETSetup for Polling Receive with Secure Code Sequential Polling Only For FAX-525DT Setup Delayed Polling ReceivePollingstandard Cancel JOB Cancelling a Scheduled JobDialling Multiple Copies For FAX-525DT Only Copy FunctionsPC Interface A P T E R F I V E Setup Send BeforeYou BeginAutomatic Transmission Manual TransmissionManual and Automatic Fax Redial Contrast ResolutionBasic Sending Operations Accepted NextAdvanced Sending Operations Overseas ModeOverseas Mode Memory Transmission For FAX-525DT OnlyDelayed Transmission Timer Broadcasting For FAX-525DT OnlyNext-Fax Reservation Multiple Resolution TransmissionNEXT-FAX Reservd Setup for Polling Transmit Setup for Polling Transmit with Secure CodeInterrupting Timer and Polling Transmit Jobs Insert DocumentT U P S E N D A P T E R S I Storing Numbers for Easy Dialling Setup Quick-Dial NumbersStoring One Touch Dial Numbers SPEED-DIAL? # Storing Speed Dial NumbersEnter & SET Changing One Touch Speed Dial Numbers Setting Up Groups for Broadcasting For FAX- 525DT OnlySetup Groupgo Enter & SET Select ONE-TOUCHName Enter & SET Making Voice Calls Telephone Voice OperationManual Dialling Speed Dialling One Touch DiallingSearching Telephone Index Pause FAX/TEL ModeMute Tone/PulseAnswering Calls with the Speakerphone Only for FAX-525DT Tel Key Only for FAX-515Flexible Memory Settings Message Store Message Manager ModeMessage Manager Docoff Select & SET Setting Up Message ManagerSetting the Message Store Voiceon Select & SETTAD Message Select & SET Listening the Outgoing Message OGMTAD Message What Happens When the Memory Is Full Activating Message Manager ModeMessage Indicator Erasing the Outgoing Message OGMPrinting a Fax Message Playing Voice Messages and MemosPrint DOC? Erasing Messages Backup Printing OptionBackup Printon Select & SET Erase this MSG.?Erase ALL VOICE? Select & SET Setting the Maximum Time for Incoming MessagesSetting the Toll Saver Message 35 SEC Select & SETRecording a Conversation ICM Recording MonitorRecording a Memo Fax Forwarding/PagingFAX Forward Programming a Fax Forwarding NumberRecording the Paging Outgoing Message OGM FWD# Enter & SETProgramming the Paging Number Using the Remote Access CodeRemote Retrieval PagingChanging the Remote Access Code Remote Control Commands Remote control commands Detail OperationRetrieving the Memory Status List Retrieving Fax MessagesChanging the Fax Forwarding Number Printing Reports FAX Settings and JournalTo Print a Report Journal Period Transmission Verification Xmit ReportJournal Period Important Safety Instructions InformationA P T E R E L E V E N Clean UP Scanner TroubleshootingError Messages COMM.ERRORCutter JAM Connection FailCover Open DisconnectedNo RESPONSE/BUSY Machine Error Press Stop KEYPrinter Fault Not AssignedIf You Are Having Difficulty withYour Machine Other ProblemsScanner Error Recording Paper JamPhone Line or Connections Sending FaxesVertical Black Lines When Sending Handling Incoming CallsSpecifications One Touc h dial Glossary L O S S a R Y O S S a R Y L O S S a R Y Index Flexible Memory Settings Message Store D E X N D E 107 108 Declaration of Conformity UK/S.AF/IRE

515 specifications

The Brother 515 is a versatile and user-friendly sewing machine designed to cater to both beginners and experienced sewers alike. This model stands out in the competitive sewing machine market by offering a unique combination of innovative features, functionality, and reliability.

One of the Brother 515's main features is its comprehensive selection of built-in stitches. It typically comes with a variety of stitches, including basic stitches, decorative patterns, and functional sewing options. This range allows users to explore their creativity while ensuring that they can complete various sewing projects, from simple repairs to intricate designs.

The machine also boasts an easy-to-use interface, which is highlighted by its intuitive controls and LCD screen. This feature simplifies the process of selecting stitches and adjusting settings, making it suitable for sewers of all skill levels. Additionally, the Brother 515 includes an automatic needle threader, which significantly reduces the time spent on setup, allowing users to focus more on their projects.

Another characteristic that sets the Brother 515 apart is its robust motor and superior build quality. This sewing machine is designed to handle a wide variety of fabrics, including heavy materials like denim and canvas. Its powerful motor ensures smooth operation and consistent stitching, making it a reliable choice for lengthy sewing sessions.

Safety features are also a top priority in the Brother 515. With a protective cover, users can keep the machine safe when not in use. Moreover, the machine is equipped with features like a speed control function, which allows users to sew at a pace that suits their comfort level.

The Brother 515 also offers a wide range of accessories, including presser feet, bobbins, and needles. This inclusion makes it a versatile choice for different types of sewing tasks, from quilting to garment construction.

In summary, the Brother 515 is a well-rounded sewing machine that combines ease of use, superior technology, and a rich feature set. Its user-friendly design, powerful motor, and versatility make it an excellent choice for anyone looking to embark on their sewing journey or for those who are simply looking to upgrade their current machine. With the Brother 515, creativity knows no bounds, whether you are a novice or an accomplished sewer.
Top Page Image Contents